Premium coax,for CCTV and RF.
Epcom Titanium is the premium coaxial cabling sub-line within the Epcom portfolio: TT-RG series RG6, RG11, RG58, and RG59 coaxial cables in interior and exterior-rated jackets for CCTV video surveillance, HD video, RF applications, and broadcast distribution. The premium-tier specification when standard Epcom coax is not enough. Stocked in Miami.
About Epcom Titanium
Premium coaxial for CCTV and RF installs.
Epcom Titanium is the premium coaxial cabling sub-line within the Epcom portfolio, anchored on the TT-RG series of RG6, RG11, RG58, and RG59 coaxial cables in interior and exterior-rated jackets. The sub-line exists for installs where the standard Epcom coaxial line does not meet the spec: longer runs requiring lower attenuation per foot, exterior installs needing UV-resistant and direct-burial-capable jackets, CCTV video surveillance over coax (HD-TVI, HD-CVI, AHD analog HD) where signal integrity matters, and RF applications requiring better impedance control and shielding.
EhubAmerica stocks the most-requested Epcom Titanium SKUs in our Doral, FL warehouse: TT-RG-16 RG6 coaxial cable in standard 1000 ft reels for CCTV and HD video distribution, TT-RG-17 and TT-RG-18 RG11 coaxial for longer runs and lower attenuation requirements, RG58 and RG59 variants where applicable, and the corresponding F-type, BNC, and N-type connector accessories that complete the install. Larger project quantities and specialty SKUs coordinated through Epcom distribution.
The Epcom Titanium lineup is the practical choice for CCTV integrators deploying HD-TVI, HD-CVI, or AHD analog HD camera systems where coax run length and signal integrity matter, broadcast and RF integrators specifying premium coax for transmitter feed lines and antenna runs, installers handling longer coax runs (over 200 ft for RG6, over 500 ft for RG11) where standard coax attenuation degrades the signal, and integrators sourcing across the broader Epcom catalog where Titanium represents the premium tier within the Epcom coax lineup.
Product lines we stock
Our active Epcom Titanium catalog sorts into three practical categories. RG6 coaxial TT-RG-16 series 1000 ft reels, interior and exterior-rated jackets, with appropriate solid copper-clad steel or solid copper center conductor depending on the SKU. RG11 coaxial TT-RG-17 and TT-RG-18 series for longer runs and lower attenuation requirements (typical for runs over 300-500 ft where RG6 attenuation degrades signal beyond acceptable levels). Smaller coax (RG58, RG59) and connectors for shorter runs and connector terminations, including F-type, BNC, and N-type connector accessories.
Why EhubAmerica
Four reasons CCTV and RF integrators choose us for Epcom Titanium.
Stocked
Real Epcom Titanium inventory in our Doral, FL warehouse: TT-RG-16 RG6, TT-RG-17 and TT-RG-18 RG11, and connector accessories.
Run-engineered
We calculate coax type by run length: RG6 typical for runs under 300 ft, RG11 for runs 300-1000 ft, longer runs typically require fiber or active equalizers. Tell us the run length and we recommend the right coax.
Supported
Engineering desk for coax type selection by run length and signal type (HD-TVI, HD-CVI, AHD, RF transmitter feed), jacket selection (interior, exterior, direct burial), and connector termination guidance.
Backed
48-hour RMA replacement window on warrantied units. Epcom Titanium standard 1-year warranty honored through us for in-warranty cases.
Frequently asked
Epcom Titanium questions, coax answers.
Specific to CCTV integrators deploying HD analog camera systems, broadcast and RF integrators specifying transmitter feed lines, and installers handling longer coax runs where standard coax attenuation is a concern.
Do you stock Epcom Titanium in Miami?
Yes. We stock TT-RG-16 RG6 coaxial in 1000 ft reels, TT-RG-17 and TT-RG-18 RG11 coaxial, and connector accessories. Most in-stock orders ship same-day when placed before 2 PM ET.
RG6 versus RG11: when do I need to step up to RG11?
RG6 attenuation increases noticeably beyond 200-300 ft for high-frequency signals (HD-TVI, HD-CVI 4MP / 5MP / 8MP, broadcast RF). RG11 has lower attenuation per foot and is the right choice for runs typically 300-1000 ft. For longer runs above 1000 ft, fiber-based extenders or active coax equalizers are typically required. Tell us the run length and signal type (camera resolution, RF frequency band) and we recommend the right coax.
Is Epcom Titanium coax rated for direct burial?
The exterior-rated and direct-burial-rated SKUs are. Check the specific SKU spec sheet: some TT-RG variants are interior-rated (PVC jacket, no direct burial), some are exterior-rated (UV-resistant jacket), and some are direct-burial-rated (gel-filled or flooded core for moisture resistance). For Florida outdoor installs and especially for direct-burial applications, we recommend the explicitly direct-burial-rated SKUs with appropriate F-type or BNC weatherproof connectors. Tell us the install environment and we recommend the right SKU.
Does Epcom Titanium coax work for HD-TVI and HD-CVI cameras?
Yes. Epcom Titanium coax is specified for analog HD camera signals (HD-TVI, HD-CVI, AHD) up to 4K analog HD at appropriate run lengths. The solid copper or copper-clad steel center conductor and dual-shield construction deliver the impedance consistency needed for clean HD video over coax. For 4K analog HD specifically, RG11 is recommended for runs over 200 ft to maintain signal quality.
Why specify Epcom Titanium versus standard Epcom coax?
Epcom Titanium represents the premium tier within the Epcom coax lineup: better center conductor (solid copper vs copper-clad steel in some standard SKUs), better shielding (dual or quad shield vs single shield), better jacket materials for exterior and direct-burial applications, and tighter impedance tolerance for clean signal integrity at higher frequencies. For CCTV under 200 ft, standard Epcom coax often works fine. For longer runs, premium signal integrity needs, or exterior installs, Epcom Titanium.
What is the Epcom Titanium RMA process at EhubAmerica?
Send the unit with a brief problem description and the original order or invoice reference. We issue replacement within 48 hours of receipt for units under warranty. Epcom standard 1-year warranty on coax. Warranty covers manufacturing defects (cable continuity failures, shield issues), not damage from incorrect connector termination, improper installation, or impact during pull.
Let us quote your Epcom Titanium order.Same-day response.
Send us the project: total coax footage, signal type (HD-TVI, HD-CVI, AHD, RF), maximum run length, jacket requirement (interior, exterior, direct burial), and any connector quantities. We come back with stock confirmation, lead time, and pricing.