Guyed towers,engineered in Mexico.
Modular guyed tower sections (STZ-30, STZ-45, STZ-90 series) in 3-meter sections, complete tower kits (KTZ series) for installs from 3m up to 60m, mast hardware, and the accessories that complete a telecom or radio tower deployment. ISO 9001:2015 manufacturing. Electrolytic galvanizing for dry zones, hot-dip galvanizing for humid and coastal environments. 200 km/h wind resistance.
About Syscom Towers
Modular guyed towers for telecom and radio sites.
Syscom Towers is the tower manufacturing brand within the Syscom ecosystem, specializing in modular guyed tower sections (torres arriostradas) and complete tower kits for telecommunications, radio communication, and wireless infrastructure deployments. Manufactured under ISO 9001:2015 certification with each tower section built on numerically-controlled machinery, the product line covers modular sections from 30 cm to 90 cm face dimensions, complete pre-engineered kits from 3 meters up to 60 meters of elevation, and the mast and mounting accessories that complete a tower install. Tower designs handle 200 km/h wind speeds with appropriate guy-wire configuration.
EhubAmerica stocks the most-requested Syscom Towers SKUs through coordinated Doral, FL warehouse and Syscom distribution channels: STZ-30 and STZ-30G modular sections (3m x 30cm, electrolytic for dry zones or hot-dip galvanized for humid environments, up to 30m elevation in 10 sections, 200 kg maximum load), STZ-45 and STZ-45G sections (3m x 45cm, higher load capacity, up to 60m elevation), STZ-90 series larger sections for tall and heavy-load installations, KTZ series complete tower kits (KTZ-30, KTZ-45 in various heights with all components pre-inspected and bundled including tower sections, mast, base plate, guy wires, anchors, hardware), MSC and SOM series masts and accessories, and tower hardware (bolts, brackets, anchor accessories). Larger project quantities and specialty configurations coordinated through Syscom distribution with 2-4 week lead times for kit assembly.
The Syscom Towers lineup is the practical choice for wireless ISP operators deploying tower sites in rural and remote areas where modular guyed towers are the cost-effective alternative to self-supporting towers, radio communication integrators installing repeater base stations on dedicated towers where reliable structural engineering matters, telecommunications infrastructure installers building backhaul tower sites for microwave PtP links, ham radio and amateur radio operators specifying full-spec engineered guyed towers (rather than improvised structures) for safety and warranty support, and LATAM-market integrators familiar with the Syscom Towers product line and looking to source the brand for US-based and Caribbean installations where Florida coastal and humid environments require hot-dip galvanizing.
Product lines we stock
Our active Syscom Towers catalog sorts into four practical categories. STZ modular tower sections 3-meter modular sections in 30 cm (STZ-30), 45 cm (STZ-45), and 90 cm (STZ-90) face dimensions, available in electrolytic galvanizing (E suffix, for dry zones with under 35 percent average humidity) or hot-dip galvanizing (G suffix, for humid and coastal environments). KTZ complete tower kits pre-engineered tower kits with all components bundled (sections, mast, base, guy wires, anchors, hardware) for installs from 3m to 60m elevation, simplifying selection and installation. Masts and accessories MSC series masts (MSC-30A-6 and related), SOM series mounting accessories (SOM-90 and related), and tower-top mast hardware. Tower hardware and fittings replacement bolts, brackets, anchor plates, guy wire fittings (NUDO-316-FJG stainless steel guy fittings), and the small hardware that completes a tower install.
Why EhubAmerica
Four reasons tower integrators choose us for Syscom Towers.
Stocked
Real Syscom Towers inventory through coordinated Doral, FL and Syscom distribution: STZ modular sections, KTZ tower kits, masts, and tower hardware.
Engineered
ISO 9001:2015 manufacturing. Tower designs rated for 200 km/h wind speeds with appropriate guy-wire configuration. We help size tower height, load capacity, and galvanizing for your install environment.
Supported
Engineering desk for tower height selection by load (antenna count and weight), galvanizing type (electrolytic for dry zones, hot-dip for coastal Florida and Caribbean), and complete kit configuration.
Backed
48-hour RMA replacement window on warrantied units. Syscom Towers manufacturer warranty honored through us for in-warranty cases (manufacturing defects only).
Frequently asked
Syscom Towers questions, tower install answers.
Specific to wireless ISP operators deploying tower sites, radio communication integrators installing repeater base stations, telecommunications infrastructure installers, ham radio operators specifying engineered guyed towers, and LATAM-market integrators familiar with Syscom Towers from Mexican deployments.
Do you stock Syscom Towers in Miami?
We stock common-spec tower sections (STZ-30 and STZ-30G) and high-turnover hardware (NUDO-316-FJG stainless guy fittings, replacement bolts) in our Doral, FL warehouse for same-day shipping. Complete tower kits (KTZ series) and specialty configurations are coordinated through Syscom distribution with typical 2-4 week lead times for kit assembly and shipping. Tell us your project and we confirm lead time at quote.
STZ-30 versus STZ-45 versus STZ-90: how do I choose tower face size?
Tower face size determines load capacity and maximum elevation. STZ-30 (30 cm face) handles up to 200 kg load at maximum 30m elevation (10 sections), suitable for small radio and wireless ISP installs with light antenna loads. STZ-45 (45 cm face) handles higher loads and extends up to 60m, suitable for medium telecom installs with multiple antennas. STZ-90 (90 cm face) handles heavier loads and taller installs (broadcast, multi-tenant cell sites). Tell us the antenna count, individual weight, mounting height, and we recommend the right section.
Electrolytic (E) versus hot-dip galvanized (G): which for Florida?
For Florida coastal and humid environments, hot-dip galvanized (G suffix, e.g. STZ-30G) is the correct specification. Electrolytic galvanizing (E suffix) is rated for dry zones with under 35 percent average humidity and no corrosive agents (salt, chemicals) and would corrode prematurely in Florida and Caribbean conditions. Hot-dip galvanizing provides a thicker zinc layer for outdoor exposure to humidity and salt air. For non-coastal Florida interior installs, hot-dip is still recommended given the humidity. Caribbean and saltwater-adjacent installs are always hot-dip.
Do tower kits include guy wires and anchors?
Yes. KTZ series complete tower kits include all components needed for the install: tower sections, top mast, base plate, guy wires in appropriate gauge, anchor plates, turnbuckles, thimbles, guy fittings (NUDO-316-FJG stainless or equivalent), and the bolts and hardware for assembly. The kit is pre-inspected at manufacture for completeness. Foundation work (concrete anchor pad, ground anchors) is on-site work and not included in the kit. Tell us the kit model and we confirm the complete component list before quoting.
Do I need a structural engineer for tower installation?
Yes for any commercial or permitted tower installation. Most US municipalities and counties require a stamped structural engineering review for tower installations above 35-50 feet (varies by jurisdiction), and most require permits and zoning approval. Florida specifically requires hurricane-zone engineering review (wind speed rating, foundation engineering) for any commercial tower. Even for residential ham radio towers, a structural engineer should review foundation design and guy-anchor placement. We provide tower spec sheets but cannot substitute for site-specific engineering. Coordinate with a local structural engineer familiar with telecom tower installations.
What is the Syscom Towers RMA process at EhubAmerica?
Send the unit or component with a brief problem description and the original order or invoice reference. We coordinate replacement within 48 hours of receipt for units under warranty. Syscom Towers warranty covers manufacturing defects (galvanizing failures within rated environment, dimensional issues, weld defects). Warranty does not cover damage from incorrect installation, exceeding rated loads or wind speeds, foundation failures, lightning strikes, hurricane damage exceeding 200 km/h rating, or use in incorrect galvanizing environment (electrolytic in humid zones).
Let us quote your Syscom Towers order.Same-day response.
Send us the project: target elevation, antenna count and individual weight, install environment (dry interior, humid, coastal, Caribbean), wind exposure, and whether you need modular sections or a complete pre-engineered kit. We come back with section or kit recommendation, galvanizing type, stock and lead time, and bundled accessory quote.