Skip to product information
1 of 6

Icom V3MR MURS Two Way Radio License Free 16 Ch VOX CTCSS / DTCS

Icom V3MR MURS Two Way Radio License Free 16 Ch VOX CTCSS / DTCS

Regular price $149.95
Regular price Sale price $149.95
Sale Sold out
Taxes included. Shipping calculated at checkout.

Low stock: 5 left

View full details

SPECIFICATIONS

IC-V3MR
Usable Frequencies and (bandwidth)

151.820 MHz (11.25 kHz), 151.880 MHz (11.25 kHz),
151.940 MHz (11.25 kHz), 154.570 MHz (20.00 kHz),
154.600 MHz (20.00 kHz)

Number of Memory channels  16 ch
Transmit output power 2 W (High), 1 W (Mid), 0.5 W (Low)
Receiver sensitivity 0.25 μV (typical) for 12 dB SINAD
Squelch sensitivity 0.25 μV (typical) at squelch threshold point
Audio output power
(at 5% distortion, 8 Ω load)
Internal SP 1.5 W (typical)
External SP 0.4 W (typical)
HM-222HLWP 1.5 W (typical)
Antenna impedance 50 Ω
Power supply Voltage 7.2 V DC
Current drain Receive stand-by 75 mA
Receive max. audio 500 mA
Transmit (High) 0.9 A
Dimensions (Projections not included) 58 (W) × 111 (H) × 35.5 (D) mm,
2.3 (W) × 4.4 (H) × 1.4 (D) in (with BP-298)
Weight (Approximate) 265 g, 9.3 oz (with BP-298)

All stated specifications are subject to change without notice or obligation.
Measurements made in accordance with TIA-603.

Applicable U.S. Military Specifications

Standard
MIL-810 G
Method
Procedure
Simple explanation
(radio specifications are not changed after each test)
Low Pressure

500.5

I, II

Keep the transceiver 20℃/101.3 kPa and
25℃/57.2 kPa for a total of 7 hours
High Temperature

501.5

I, II

Keep the transceiver between 30 to 63℃ for a total of 168 hours
Low Temperature

502.5

I, II

Keep the transceiver at -25℃ for 4 hours
Temperature Shock

503.5

I-C

Keep the transceiver at -51℃/2 h and +71℃/2 h × 3 cycles (total 12 hours)
Solar Radiation

505.5

I

Keep the transceiver at 49℃ and 1120 W/m2 for 24 h × 3 cycles (for a total of 72 hours)
Rain Blowing/Drip

506.5

I, III

I : Blast 1.7 mm/min rain with 18 m/s wind for
30 min to 6 surfaces (for a total of 180 min)
III: Drip water 2800 l/m2/h for 15 min.
Humidity

507.5

II

Keep the transceiver at 95% humidity with 30℃ and 60℃ for 240 hours.
Salt Fog

509.5

-

Spray 5% salt water with 1-3 ml/h at 80 cm 2 under 35℃/95% condition for 24 hours then dry it under 24℃/50% condition × 2 cycles
Dust Blowing

510.5

I

Blowing talc powder Temp/time: 23℃/6 h and 60℃/6 h, humidity: less than 30%, wind speed: 8.9 m/s, powder density: 10 ±7 g/m3
Vibration

514.6

I Vibrate the transceiver at each 3 axis (X, Y, Z), frequencies 5 – 500 Hz, 1.05 G for 1 hour
Shock

516.6

I, IV

When packing, drop 1.22 m height for
6 surfaces, 8 corners, 12 edges (total 26 drops)

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Ingress Protection Standards

Dust & Water

IP54 (Dust-protection and water resistant)

Supplied Accessories

  • Battery Pack, BP-298
  • Rapid Charger, BC-240
  • AC Adapter, BC-242
  • Belt Clip, MB-124
  • Antenna, FA-SC28V