Cambium Networks C058940M142A ePMP Force 4525 5GHz 25dBi Subscriber Module

PRODUCT OVERVIEW

Cambium Networks C058940M142A ePMP Force 4525 FCC subscriber module with integrated 25dBi dish antenna, 5GHz wideband operation, 2x2 MIMO/OFDMA, 80MHz channels, Gigabit Ethernet, and passive PoE. US cord bulk packaging.

PRODUCT TYPE / CATEGORY

Parent Category: Networking
Subcategory: Point-to-Multipoint Systems

KEY FEATURES

• Manufacturer Part Number: C058940M142A
• ePMP Force 4525 Subscriber Module
• FCC configuration with US cord
• Bulk packaging configuration
• Designed for point-to-multipoint and point-to-point fixed wireless broadband applications
• Integrated 25dBi dish antenna
• 5150-5920MHz wideband operation, subject to applicable country regulations
• 20, 40, and 80MHz channel widths
• 2x2 MIMO/OFDMA physical layer
• Adaptive modulation from MCS 0 BPSK through MCS 11 1024QAM-5/6
• Gigabit 100/1000 Base-T Ethernet interface
• Compatible with Cambium PoE and standard PoE pinouts
• Compatible with ePMP 4500 Series Access Points for MU-MIMO operation
• ePMP 4500 platform supports simultaneous transmission to four compatible ePMP 4500 subscriber modules
• High-capacity operation using 80MHz channels
• Less than 5ms latency when using ePTP technology
• Three-level QoS for voice, high, and low-priority traffic
• IPv4/IPv6 dual-stack support
• cnMaestro network management
• 802.1Q VLAN with 802.1p priority
• Integrated 1-Joule surge suppression
• 128-bit AES encryption in CCMP mode
• 256-bit AES supported as an optional capability where allowed
• IP55 environmental rating
• Passive PoE power input
• Manufacturer states each SM comes with a PoE injector and pole mount hardware
• 3-year manufacturer hardware warranty and support

TECHNICAL SPECIFICATIONS

• Brand: Cambium Networks
• Product Family: ePMP Force 4500 Series
• Model: Force 4525
• Manufacturer Part Number: C058940M142A
• Regional Configuration: FCC
• Cord Configuration: US
• Packaging: Bulk
• Frequency Range: 5150-5920MHz
• Channel Width: 20 / 40 / 80MHz
• Channel Spacing: Configurable in 5MHz increments
• Physical Layer: 2x2 MIMO/OFDMA
• MAC Layer: Cambium proprietary
• Ethernet Interface: 100/1000 Base-T
• Protocols: IPv4/IPv6, UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH
• Network Management: IPv4/IPv6, HTTPS, SNMPv2c, SSH, Cambium Networks cnMaestro
• VLAN: 802.1Q with 802.1p priority
• ARQ: Supported
• Adaptive Modulation: MCS 0 BPSK through MCS 11 1024QAM-5/6
• Receive Sensitivity at 20MHz: -91dBm at MCS 0 to -59dBm at MCS 11, per chain
• Receive Sensitivity at 40MHz: -88dBm at MCS 0 to -56dBm at MCS 11, per chain
• Receive Sensitivity at 80MHz: -85dBm at MCS 0 to -53dBm at MCS 11, per chain
• Transmit Power Range: +3 to +28dBm combined, subject to regional EIRP limits
• QoS: Three priority levels – Voice, High, Low
• QoS Classification: DSCP, COS, VLAN ID, IP/MAC address, broadcast, multicast, station priority
• MIR/CIR Support: Yes
• Antenna Type: Integrated dish
• Antenna Gain: 25dBi
• Surge Suppression: 1 Joule integrated
• Environmental Rating: IP55
• Operating Temperature: -30°C to +55°C (-22°F to +131°F)
• Wind Survival: 200km/h (124mph)
• Power Consumption: 13W; up to 15W in extreme cold when heater is activated
• Input Voltage: Passive PoE, 27-59V
• Dimensions: 472 × 472 × 296mm (18.5 × 18.5 × 11.7in)
• Weight: 2.76kg (6.1lb)
• Supported Pole Diameter: 3.1-7.6cm (1.25-3.0in)
• Encryption: 128-bit AES CCMP; optional 256-bit AES where allowed
• FCC ID: Z8H89FT0074
• FCC Regulatory Part Number: C058940P142A
• Industry Canada Certification: 109W-0074
• Manufacturer-Stated Warranty: 3-year hardware warranty

INTENDED USE / APPLICATIONS

• Point-to-multipoint fixed wireless broadband subscriber deployments
• Point-to-point fixed wireless broadband links
• Residential broadband service
• Enterprise broadband connectivity
• Voice, video, and data service delivery
• Deployments using compatible ePMP 4500 Series Access Points
• Networks requiring centralized provisioning, monitoring, and upgrades through cnMaestro