Cambium Networks C068940M142B ePMP Force 4625 6GHz Subscriber Module (4-Pack)

PRODUCT OVERVIEW

Cambium Networks ePMP Force 4625 6GHz Subscriber Module 4-pack with integrated 25dBi dish, 2x2 MIMO/OFDMA, 160MHz channels, Gigabit Ethernet, passive PoE, and FCC/IC configuration with US cords.

PRODUCT TYPE / CATEGORY

Parent Category: Networking
Subcategory: Point-to-Multipoint Systems

KEY FEATURES

• Manufacturer Part Number: C068940M142B
• ePMP Force 4625 Subscriber Module
• Manufacturer-verified 4-pack packaging
• FCC/IC configuration with US cord
• Manufacturer ordering information specifies pricing per radio within the 4-pack
• 5925-7125MHz operating frequency range, subject to applicable country regulations and AFC requirements
• Integrated 25dBi dish antenna
• 2x2 MIMO/OFDMA ePMP air interface
• 20, 40, 80, and 160MHz channel widths
• Up to 1Gbps capacity in PTP applications
• Supports point-to-multipoint and point-to-point fixed wireless broadband deployments
• Interoperates with ePMP 4600 Series Access Points in PMP applications
• Less than 5ms latency when using ePTP technology
• Adaptive modulation through MCS 11 1024QAM-5/6
• 100/1000 Base-T Ethernet
• Three-level QoS for voice, high, and low-priority traffic
• IPv4 and IPv6 protocol support
• 802.1Q VLAN with 802.1p priority
• HTTP/HTTPS, SNMP, and SSH network management
• cnMaestro management support
• Network planning support through LINKPlanner and cnHeat
• Integrated 1-Joule surge suppression
• IP55 environmental rating
• 128-bit AES encryption; 256-bit AES available as an optional capability where allowed
• External USB GPS receiver capability for regions requiring geolocation
• Manufacturer states each SM comes with a PoE injector and pole-mount hardware
• 3-year manufacturer hardware warranty and support

TECHNICAL SPECIFICATIONS

• Brand: Cambium Networks
• Product Family: ePMP Force 4600 Series
• Model: Force 4625
• Manufacturer Part Number: C068940M142B
• Package Quantity: 4 Subscriber Modules
• Packaging: 4-Pack, priced per radio per manufacturer ordering terminology
• Regulatory Configuration: FCC/IC
• Cord Configuration: US
• Frequency Range: 5925-7125MHz
• Channel Width: 20 / 40 / 80 / 160MHz
• Channel Spacing: Configurable in 5MHz increments
• Physical Layer: ePMP air interface with 2x2 MIMO/OFDMA
• MAC Layer: Cambium proprietary
• Ethernet Interface: 100/1000 Base-T, auto-negotiated
• Ethernet Compliance: 802.3at
• Protocols: IPv4/IPv6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPS, STP, SSH, IGMP snooping
• Network Management: HTTP/HTTPS, SNMPv1/2, SNMPv3, SSH
• VLAN: 802.1Q with 802.1p priority
• ARQ: Supported
• Adaptive Modulation: MCS 0 BPSK through MCS 11 1024QAM-5/6
• Receive Sensitivity at 20MHz: -92dBm at MCS 0 to -61dBm at MCS 11, per chain
• Receive Sensitivity at 40MHz: -89dBm at MCS 0 to -58dBm at MCS 11, per chain
• Receive Sensitivity at 80MHz: -86dBm at MCS 0 to -55dBm at MCS 11, per chain
• Receive Sensitivity at 160MHz: -86dBm at MCS 0 to -51dBm at MCS 11, per chain
• Transmit Power Range: +3 to +30dBm combined, subject to regional EIRP limits
• QoS: Three-level priority – Voice / High / Low
• Antenna: Integrated 25dBi dish
• Geolocation: External USB GPS receiver capability
• Surge Suppression: 1 Joule integrated
• Environmental Rating: IP55
• Operating Temperature: -40°C to +55°C (-40°F to +131°F)
• Power Consumption: 13W; up to 15W in extreme cold when heater is activated
• Input Voltage: 44-59V
• Dimensions: 472 × 472 × 296mm (18.5 × 18.5 × 11.7in)
• Weight: 2.76kg (6.1lb) per radio
• Supported Pole Diameter: 3.1-7.6cm (1.25-3.0in)
• Encryption: 128-bit AES CCMP; optional 256-bit AES where allowed
• FCC ID: Z8H89FT0075
• Industry Canada Certification: 109W-0075
• FCC Regulatory Part Number: C068940P142A
• Manufacturer-Stated Warranty: 3 years

INTENDED USE / APPLICATIONS

• Point-to-multipoint fixed wireless broadband subscriber deployments
• Point-to-point fixed wireless broadband links
• Enterprise wireless connectivity
• Industrial wireless networks
• Government network deployments
• Service provider broadband networks
• Networks requiring high capacity using channel widths up to 160MHz
• Deployments using compatible ePMP 4600 Series Access Points