DMP XT75 142-Zone Network Alarm Panel Small Gray Enclosure

DMP · Intrusion & Alarm

DMP XT75 142-Zone Network Control Panel, Small Gray Enclosure

Part number / SKU
XT75

Works with: 1100XH wireless receiver, 1100R wireless repeater, 716 output expansion module, 263LTE-2 DualSIM cellular communicator, XT Series keypads Confirmed by the manufacturer

$349.12

In stock

Warranty
Manufacturer warranty

Need project or contract pricing?

Request project pricing

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The DMP XT75 is a hybrid control panel for residential and small to medium business use that combines intrusion detection, access control and AlarmVision video analytics in one panel. This model is the small gray enclosure version, with an onboard Ethernet connection. It supports 142 total zones, with up to 92 hardwired zones and up to 100 DMP wireless zones.

The panel handles 6 areas, 8 doors of access and 8 supervised keypads, with a 1,000 event buffer, 2 A of auxiliary power and switched 4-wire smoke detector power. It reports to the monitoring center by network or cellular over four communication paths, with cellular added through the 263LTE-2 DualSIM communicator. Zones 1 to 9 accept 1k to 10k ohm end-of-line resistors and zone 10 uses a 3.3k ohm resistor, with 12 VDC resettable smoke power on the board. The panel takes 16.5 VAC input and has a 12 VDC bell output and four open collector outputs.

The XT75 is CSFM approved and ETL listed to UL 985, UL 1023 and UL 2610. Firmware updates are free through Dealer Admin.

  • Best for: residential and small to medium business sites that want intrusion, access control and video analytics on one panel.
  • System fit: DMP 1100XH wireless receiver, 1100R repeater, 716 output expansion, 263LTE-2 cellular, Dealer Admin and Virtual Keypad.
  • Important to know: installation and programming should be done by a qualified alarm technician in line with local code.

Why teams choose it

Built for secure sites

  • Hybrid capacity

    142 zones with up to 100 wireless.

  • Access and analytics

    access control and AlarmVision in one panel.

  • Four paths

    network or cellular reporting with 263LTE-2 DualSIM option.

  • Auxiliary power

    2 A with switched 4-wire smoke power.

Specifications

Technical specifications

General
Brand DMP
Model XT75
Device Type Intrusion and access control panel
Zones 142 total (up to 92 hardwired, up to 100 wireless)
Areas 6
Doors 8
Supervised Keypads 8
Event Buffer 1,000
Zone Inputs Zones 1 to 9: 1k to 10k ohm EOL; zone 10: 3.3k ohm EOL
Zone Wiring 18 to 24 AWG, up to 4,000 ft
Outputs 4 open collector outputs
Communication Ethernet (RJ45) or cellular, 4 paths; 263LTE-2 DualSIM for cellular
Onboard Wireless Receiver 1,400 ft open air; 1100XH receiver for 1.7 miles open air
Electrical
AC Input 16.5 VAC, 18 AWG
Auxiliary Power 2 A
Smoke Power Switched 4-wire smoke detector power; 12 VDC resettable
Bell Output 12 VDC
Battery Thresholds Low battery 11.9 V; cutoff 10.2 V; restore 12.6 V
Physical
Enclosure Small gray
Listings and Approvals
Agency Approvals CSFM; ETL listed to ANSI/UL 985, 1023, 2610