DSC KIT445-7POR PC1832 Control Panel Kit LCD5511 Keypad

DSC · Intrusion & Alarm

DSC KIT445-7POR PowerSeries PC1832 Control Panel Kit with LCD5511 Keypad

Part number / SKU
KIT445-7POR

Works with: PC5108 zone expander, PC5100 addressable module, PC5132-433 wireless receiver, RF5108-433 wireless receiver, PC5200 power supply module, PC5204 power supply output module and 10 more models Confirmed by the manufacturer

$104.99

In stock

Warranty
Manufacturer warranty

Need project or contract pricing?

Request project pricing

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The DSC KIT445-7POR is a PowerSeries kit that pairs the PC1832 control panel with an LCD5511 fixed message LCD keypad. The PC1832 has 8 zones on board and expands to 32 hardwired zones with three PC5108 expanders or up to 32 wireless zones, with 4 partitions, up to 8 keypads, 32 user codes and a 500 event buffer.

The panel runs from a 16.5 VAC, 40 VA transformer and a 4, 7 or 14 Ah sealed lead acid battery, and provides 700 mA of auxiliary current at 11.1 to 12.6 VDC, a supervised 700 mA bell output with 2 A PTC protection, and two PGM outputs rated 50 mA and 300 mA. The LCD5511 keypad draws 85 mA from the panel Keybus. The panel operates indoors from 0 to 49 C at up to 93 percent relative humidity.

  • Best for: starting a PowerSeries PC1832 intrusion system with a fixed message LCD keypad.
  • System fit: DSC PowerSeries keypads and Keybus modules such as PC5108, PC5132-433, RF5108-433, PC5200, PC5204 and PC5208.
  • Important to know: check the package contents before installation by a qualified alarm technician.

Why teams choose it

Built for secure sites

  • Panel and keypad together

    PC1832 control panel with LCD5511 fixed message LCD keypad.

  • Scalable zones

    8 on board, up to 32 hardwired or 32 wireless zones.

  • Four partitions

    up to 4 partitions with 32 user codes and up to 8 keypads.

  • Supervised bell output

    700 mA continuous with 2 A PTC protection.

Specifications

Technical specifications

General
Brand DSC
Model KIT445-7POR
Series PowerSeries (PC1832)
Device Type Control panel kit
Kit Contents PC1832 control panel, LCD5511 keypad
Keypad LCD5511 fixed message LCD, 85 mA
Zones 8 on board; up to 32 hardwired with 3 PC5108 expanders; up to 32 wireless
Partitions 4
Keypads Up to 8
User Codes 32 plus master code
Event Buffer 500 events
Zone Wiring Normally closed, single EOL or double EOL; 22 to 18 AWG
PGM Outputs PGM1 50 mA, PGM2 300 mA, switched to ground
Bus Interface 4-wire Keybus; up to 1,000 ft to any module, 3,000 ft total
Electrical
Transformer 16.5 VAC, 40 VA, 60 Hz (PTD1640U for UL installations)
Operating Voltage 11.1 to 12.6 VDC AUX
AUX Output Current 700 mA maximum total for keypads, PGMs and auxiliary circuits
Bell Output 11.1 to 12.6 VDC, 700 mA continuous, supervised, 2 A PTC protected
Panel Current Draw 110 mA nominal
Battery 4 Ah, 7 Ah or 14 Ah sealed lead acid or gel
Charge Current 400 mA default; about 700 mA selectable
Environmental
Operating Temperature 0 to 49 C (32 to 120 F)
Humidity Up to 93 percent RH
Installation Environment Indoor, non-hazardous locations
Listings and Approvals
Standards Classified under ANSI/SIA CP-01-2000