Epcom SYS-4533-4P UHF Band Reject Duplexer 490-520 MHz 50W BNC
- EhubAmerica SKU
- SYS-4533-4P
$267.43
In stock
- Warranty
- Manufacturer warranty
Need project or contract pricing?
Request project pricing- Help in English, Spanish and Portuguese
- 30-day returns
Not sure it fits your system? Check compatibility
Overview
What it is and who it is for
PRODUCT OVERVIEW
SYS-4533-XP series Mobile Duplexer uses six capacitively tuned TEM resonators in a compact
PRODUCT TYPE
RF Accessories
KEY FEATURES
- Six Cavity UHF Design for Superior Signal Isolation
- 80 dB Band Rejection for Maximum Transmit/Receive Isolation
- Low 1.2 dB Insertion Loss for Minimal Signal Degradation
- 50 Watt Maximum Continuous Power Handling Capability
- Silver-Plated Copper Resonators for Enhanced RF Performance
- BNC Female Connectors With Optional N-Type Configuration
TECHNICAL SPECIFICATIONS
- Brand: EPCOM
- Model: SYS-4533-4P
- Product Type: Networking Accessories
- Frequency Band: 490-520 MHz
- Frequency Spacing : 5 to 8 MHz.
- Continuous Power Input (Maximum): 50 Watt.
- Impedance: 50 Ohm.
- Insertion loss (TX-Ant): 1.2 dB max.
- Insertion loss (Ant-RX): 1.2 dB max.
- TX-RX Isolation: 80 dB typical.
- VSWR, max. (50 Ohms): 1.3:1
- Connectors: BNC (N Optional).
- Temperature Range: 14 to 140 º F (-10 to 60 ºC).
- Dimensions: 1.25 x 6.18 x 9.0" (31.8 x 157 x 228 mm).
- Weight: 3.5 lb (1.7 kg).
- SYS-4533-XP series Mobile Duplexer uses six capacitively tuned TEM resonators in a compact
- extruded 6063-T5 aluminum templated housing, uses solid shield copper jacketed Teflon inter-cabling for low loss, and the entire unit is electrostatically painted for additional protection.
- Wide use in "Full Duplex" systems with radio mobiles and repeaters ( 50 W. máx).
- Minimum Frequency shift by temperature changes.
- Using this device with less separation than 5 MHz between frequencies may cause operational problems for the repeater system.
- This device will not help you solve sensitivity problems in high RF locations.
- To interconnect the duplexer with the repeater, you must determine the lowest and highest frequencies; it does not matter which one is Tx or Rx.
- We manufacture any type of cable to any connector, any length, and any quantity.
- Specialized machines and experienced staff enable us to make their "Jumpers" of coaxial cable professionally, with great performance, quality, and reliability at a reduced price.
- We only use cables and connectors of the highest quality.
- Six Cavity UHF Design for Superior Signal Isolation
- 80 dB Band Rejection for Maximum Transmit/Receive Isolation
- Low 1.2 dB Insertion Loss for Minimal Signal Degradation
- 50 Watt Maximum Continuous Power Handling Capability
- Silver-Plated Copper Resonators for Enhanced RF Performance
- BNC Female Connectors With Optional N-Type Configuration
INTENDED USE / APPLICATIONS
- Professional networking and communications deployments
- Commercial, institutional, or industrial installations
- Use with compatible equipment according to manufacturer specifications
Specifications
Technical specifications
| General | |
|---|---|
| Product Type | Band Reject UHF Duplexer |
| Model | SYS-4533-4P |
| Frequency Band | 490-520 MHz |
| Frequency Spacing | 5 to 8 MHz |
| Power & Electrical | |
| Continuous Power Input (Maximum) | 50 W |
| Impedance | 50 Ohm |
| VSWR (max, 50 Ohms) | 1.3:1 |
| Insertion Loss (TX-Ant) | 1.2 dB max |
| Insertion Loss (Ant-RX) | 1.2 dB max |
| TX-RX Isolation | 80 dB typical |
| Networking & Connectivity | |
| Connectors | BNC (N Optional) |
| Physical | |
| Dimensions | 1.25 x 6.18 x 9.0" (31.8 x 157 x 228 mm) |
| Weight | 3.5 lb (1.7 kg) |
| Housing Material | 6063-T5 aluminum with electrostatically painted finish |
| Internal Cabling | Solid shield copper jacketed Teflon |
| Environmental | |
| Temperature Range | -10 to 60 °C (14 to 140 °F) |