Gamewell AMM-4SF Addressable Sub-Loop Fire Alarm Module

Gamewell · Fire Alarm

Gamewell-FCI AMM-4SF Velociti Addressable Sub-Loop Monitor Module, Class A or Class B

Part number / SKU
AMM-4SF
  • Sub-loop monitor module
  • Addressable
  • 4 in square box
  • UL, FM, MEA, CSFM

Works with: Gamewell-FCI analog addressable control panels (SLC), Conventional 2-wire smoke detectors (up to 20), 4 in square box Confirmed by the manufacturer

$60.99

In stock

Warranty
Manufacturer warranty

Need project or contract pricing?

Request project pricing

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The Gamewell-FCI AMM-4SF is an addressable sub-loop monitor module that installs on the signaling line circuit of Gamewell-FCI analog addressable control panels. It provides one initiating device circuit wired Style D, Class A, or Style B, Class B with an end-of-line resistor.

The circuit supports up to 20 conventional 2-wire smoke detectors and normally open dry contact devices such as heat detectors, manual stations, water flow switches, tamper switches, 4-wire smoke detectors and linear heat detection. Maximum line resistance is 25 ohms, and the module can stay in alarm when one smoke detector is activated. Addresses are set on rotary decimal switches from 01 to 159, up to 159 monitor modules can sit on each panel SLC, and the module mounts in a 4 in square box.

  • Best for: bringing a zone of conventional 2-wire smoke detectors or dry contact devices onto a Gamewell-FCI addressable loop.
  • System fit: signaling line circuit of Gamewell-FCI analog addressable control panels.
  • Important to know: installation and programming must be done by a qualified fire alarm technician per local code.

Why teams choose it

Built for fire alarm systems

  • Conventional sub-loop

    monitors up to 20 conventional 2-wire smoke detectors on one address.

  • Class A or Class B

    Style D Class A wiring, or Style B Class B with an end-of-line resistor.

  • Wide device support

    accepts heat detectors, manual stations, water flow, tamper and linear heat devices.

  • UL listed

    UL S1949, with 2572 for mass notification.

Specifications

Technical specifications

General
Brand Gamewell-FCI
Model AMM-4SF
Device Type Sub-loop monitor module
Device Type Detail Addressable
Addressing Addressable
Addressing Detail Rotary decimal switches 01 to 159
Capacity Up to 159 monitor modules per panel SLC
Initiating Circuit 1 circuit, Style D Class A, or Style B Class B with end-of-line resistor
Smoke Detectors Up to 20 conventional 2-wire smoke detectors
Compatible Devices Normally open dry contact devices: heat detectors, manual stations, linear heat detection, water flow switches, 4-wire smoke detectors, tamper switches
Indicators Bi-color LEDs; green flash when addressed, steady red on alarm (red only on panels not in Velociti mode)
Electrical
Maximum Line Resistance 25 ohms
Physical
Mount Type 4 in square box
Listings and Approvals
Agency Approvals UL, FM, MEA, CSFM
Approval Details UL S1949; UL 2572 (mass notification); FM 3023594; MEA FDNY 227-03-E Vol. IV; CSFM Listed
Standards ISO 9001 certified manufacturer