Kidde 435-10G1 DC Vibrating Bell Fire Alarm

Kidde · Fire Alarm

Edwards 435-10G1 10 in DC Vibrating Bell, 24 VDC

Part number / SKU
435-10G1
  • DC vibrating bell
  • Surface, any single-gang box or 4 in square box; flush with 513-A3 grille and 513-1 wall box
  • 24 VDC
$168.47

Special order· Lead time confirmed by our team after you order.

Need project or contract pricing?

Request project pricing

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The Edwards 435-10G1 is a 435 Series vibrating bell with a 10 in (254 mm) gong, rated 24 VDC. Like all 340 and 435 Series bells it produces a long, continuous ring: the striker hits the gong in rapid succession for as long as current is applied. Edwards specifies the series for timing, scheduling, paging and general alarm applications.

The bell draws 0.062 A (1.5 VA) at 24 VDC, has a DC coil resistance of 155 ohms and produces 104 dB at 1 m or 94 dB at 10 ft. It comes completely assembled with all hardware, has a die cast housing with a corrosion resistant heat flowed epoxy finish and a self-compensating solenoid plunger, and mounts directly on a surface or on any single-gang box; 6 in and 10 in bells also mount on 4 in square boxes. It measures 10 in (254 mm) in diameter by 4-13/16 in (122 mm) deep and weighs approximately 6.2 lb net.

For flush mounting, Edwards offers the 513-A3 flush mount grille with the 513-1 wall box for 10 in bells. The 449 outdoor back box is offered for DC bells.

  • Best for: timing, scheduling, paging and general alarm signaling on 24 VDC circuits.
  • System fit: 24 VDC signal circuits; 513-A3 grille and 513-1 wall box for flush mount, 449 outdoor back box.
  • Important to know: Edwards lists FM approval for the AC bells of this series only.

Why teams choose it

Built for fire alarm systems

  • Loud continuous ring

    104 dB at 1 m and 94 dB at 10 ft.

  • Low current draw

    0.062 A at 24 VDC.

  • Durable housing

    die cast housing with a corrosion resistant heat flowed epoxy finish.

  • Simple install

    arrives fully assembled and mounts on a surface, a single-gang box or a 4 in square box.

Specifications

Technical specifications

General
Brand Edwards
Series 435 Series DC vibrating bells
Model 435-10G1
Device Type DC vibrating bell
Sound Type Continuous vibrating ring
Gong Size 10 in (254 mm)
Sound Output 104 dB at 1 m; 94 dB at 10 ft
Applications Timing, scheduling, paging, general alarm
Plunger Self-compensating solenoid plunger
Included Items Completely assembled with all hardware supplied
Electrical
Operating Voltage 24 VDC
Current 0.062 A
Power 1.5 VA
Coil Resistance 155 ohms DC
Physical
Housing Die cast
Finish Corrosion resistant heat flowed epoxy
Dimensions 10 in (254 mm) diameter x 4-13/16 in (122 mm) deep
Weight Approx. 6.2 lb net
Mount Type Surface, any single-gang box or 4 in square box; flush with 513-A3 grille and 513-1 wall box
Outdoor Back Box 449 (DC bells)