Kidde G1AVRF Compact Wall Horn Strobe Fire Alarm Device

Kidde · Fire Alarm

Edwards G1AVRF Genesis LED Compact Wall Horn Strobe, Red, FIRE Marking, 15/30/75 cd

Part number / SKU
G1AVRF
  • Horn-strobe
  • Wall
  • 16 to 33 VDC or 16 to 33 VFWR
  • UL, CSFM, FCC, ICC

Works with: G1TR red trim ring, G1TW white trim ring, 27193-11 red one-gang surface box, 27193-16 white one-gang surface box, G1AVRF-CVR replacement cover, Edwards CC Series signal modules (sync source) and 1 more model Confirmed by the manufacturer

$51.99

Special order· Lead time confirmed by our team after you order.

Need project or contract pricing?

Request project pricing

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The Edwards G1AVRF is a Genesis LED G1 Series compact wall horn-strobe with a red housing and a FIRE marking. Its LED strobe is field set to 15, 30 or 75 cd with a slide switch under the cover, and the horn offers selectable temporal 3 or constant tone at high or low dB. It synchronizes with Edwards CC Series signal modules, booster and auxiliary power supplies, and intelligent and conventional control panels.

It runs on 16 to 33 VDC or VFWR and draws 35 mA DC (43 mA FWR) at the low dB setting or 45 mA DC (55 mA FWR) at high dB, at any candela setting. Horn output is 80 dBA low and 86 dBA high reverberant per UL 464, or 86 and 92 dBA anechoic per CAN/ULC-S525. The device measures 3 x 4-5/8 x 1-1/8 in, stands about 1 in off the wall, fits 1-gang, 2-gang, 4 in octagon and 4 in square boxes at least 1-1/2 in deep, and takes 12 to 18 AWG wire on in-out screw terminals.

A trim ring is required on boxes wider than 3 in: G1TR in red or G1TW in white. Color matched one-gang surface boxes are 27193-11 (red) and 27193-16 (white), and the replacement cover for this model is G1AVRF-CVR. LED strobes can share a circuit with legacy Xenon strobes.

  • Best for: indoor wall locations that need combined audible and visible fire notification in a compact, single-gang footprint.
  • System fit: 24 V notification appliance circuits with Edwards CC Series signal modules, booster and auxiliary supplies, or intelligent and conventional panels as the sync source.
  • Important to know: installation and programming must be done by a qualified fire alarm technician per local code.

Why teams choose it

Built for fire alarm systems

  • Low current LED strobe

    35 to 45 mA DC for the horn-strobe, so more devices fit on a circuit.

  • Field selectable output

    15, 30 or 75 cd set by slide switch, with the setting visible through a side window.

  • Configurable horn

    temporal 3 or constant tone and high or low dB, up to 92 dBA anechoic.

  • Compact, low profile

    single-gang size, about 1 in deep, with no visible mounting screws.

Specifications

Technical specifications

General
Brand Edwards
Series Genesis LED G1 Series compact notification
Model G1AVRF
Device Type Horn-strobe
Device Type Detail Audible and visible notification appliance
Mount Type Wall
Color Red
Marking FIRE
Candela Settings 15, 30 or 75 cd, field selectable
Flash Rate About 1 flash per second
Horn Tones Temporal 3 (factory set) or constant
Horn Volume High or low dB; low reduces output about 6 dBA
Sound Output, Reverberant (UL 464) 80 dBA low; 86 dBA high
Sound Output, Anechoic (CAN/ULC-S525) 86 dBA low; 92 dBA high
Synchronization Within 10 ms over two hours with a compatible sync source; 20 ohm max wire resistance between any two devices
Sync Sources Edwards CC Series signal modules, booster and auxiliary power supplies, intelligent and conventional control panels
Electrical
Operating Voltage 16 to 33 VDC or 16 to 33 VFWR
Current, Low dB 35 mA DC; 43 mA FWR (any candela setting)
Current, High dB 45 mA DC; 55 mA FWR (any candela setting)
Wire Size 12 to 18 AWG (0.75 to 2.50 mm²), in-out screw terminals
Physical
Dimensions 3 x 4-5/8 x 1-1/8 in (7.62 x 11.75 x 2.86 cm) W x H x D
Protrusion About 1 in from mounting surface
Back Box 1-gang, 2-gang, 4 in octagon or 4 in square, at least 1-1/2 in (3.81 cm) deep
Trim Ring G1TR (red) or G1TW (white); required on boxes wider than 3 in
Surface Box 27193-11 (red) or 27193-16 (white), one-gang
Environmental
Operating Temperature 32 to 122°F (0 to 50°C)
Humidity 0 to 93% noncondensing
Listings and Approvals
Agency Approvals UL, CSFM, FCC, ICC
Approval Details UL 1971; UL 1638; UL 464; CSFM; FCC; ICC
Standards ADA, 28 CFR Part 36 final rule