Kidde SIGA-270 Manual Pull Station Single Action Fire Alarm

Kidde · Fire Alarm

Edwards SIGA-270 Signature Series Single Action Addressable Pull Station, One Stage

Part number / SKU
SIGA-270
  • Manual pull station
  • Addressable, 1 module address
  • 2-1/2 in deep 1-gang box
  • 15.2 to 19.95 VDC
  • UL, ULC, MEA, CSFM, FM

Works with: Signature loop controllers, 276B-RSB red surface mount box, 270-GLR glass rods (20, USA), SIGA-PRO program/service tool (optional addressing) Confirmed by the manufacturer

$91.89

In stock

Warranty
Manufacturer warranty

Need project or contract pricing?

Request project pricing

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The Edwards SIGA-270 is a Signature Series intelligent manual pull station, single action and one stage, with English markings. Its teardrop-shaped die-cast zinc body has a red epoxy finish and aluminum markings, and a visible glass rod discourages tampering; the rod is not needed for the station to operate.

The station uses one module address and draws 250 µA standby and 400 µA when activated on 15.2 to 19.95 VDC. It is addressed electronically by the Signature loop controller with no switches or dials, permanently stores its address, serial number, device type and job number, maps its wiring location automatically and can still register an alarm if the loop controller stops polling. It mounts to a North American 2-1/2 in deep 1-gang box, or the 276B-RSB red surface box, and accepts #12 to #18 AWG wire. Edwards lists it UL, ULC, MEA, CSFM and FM.

  • Best for: manual fire alarm initiation on Signature Series systems where a single action station is specified.
  • System fit: Edwards Signature loop controllers; 276B-RSB surface box; 270-GLR glass rods.
  • Important to know: installation and programming must be done by a qualified fire alarm technician in line with local code and the control panel documentation.

Why teams choose it

Built for fire alarm systems

  • Addressable station

    one module address with electronic addressing and automatic device mapping.

  • Alarm without polling

    registers an alarm even when the loop controller has stopped polling.

  • Visible status

    green LED flashes when polled, red LED flashes in alarm.

  • Listed device

    UL, ULC, MEA, CSFM and FM, and meets ADA pull station requirements.

Specifications

Technical specifications

General
Brand Edwards
Series Signature Series
Model SIGA-270
Device Type Manual pull station
Device Type Detail Single action, one stage
Addressing Addressable, 1 module address
Addressing Detail Electronic (no switches)
Device Mapping Automatic
Markings English
LED Indication Green flashes when polled; red flashes in alarm; both steady in stand-alone alarm
Compatibility Signature loop controller
Mount Type 2-1/2 in deep 1-gang box
Mount Type Detail North American 2-1/2 in (64 mm) deep 1-gang box; 276B-RSB red surface box
Electrical
Operating Voltage 15.2 to 19.95 VDC
Operating Voltage Detail 19 VDC nominal
Standby Current 250 µA
Activated Current 400 µA
Wire Size #12 to #18 AWG (2.5 to 0.75 mm²)
Physical
Construction Die-cast zinc, red epoxy finish, aluminum markings
Tamper Deterrent Visible glass rod (not required for operation)
Environmental
Operating Temperature 32 to 120°F (0 to 49°C)
Storage Temperature -4 to 140°F (-20 to 60°C)
Humidity 0 to 93% RH
Listings and Approvals
Agency Approvals UL, ULC, MEA, CSFM, FM
Standards Meets ADA requirements for manual pull stations