MikroTik S+RJ10 SFP+ to RJ45 Copper Module, 10M to 10G Multi-Rate

MikroTik · Transceivers

MikroTik S+RJ10 SFP+ to RJ45 Copper Module, 10M to 10G Multi-Rate

Part number / SKU
S+RJ10
  • Up to 10 Gbps
  • 1x 10G RJ45
  • SFP+

Works with: CCR1072-1G-8S+, CCR1036 series, CCR1016-12S-1S+, CCR1009 series, CRS317-1G-16S+RM, CRS210-8G-2S+IN and 2 more models Confirmed by the manufacturer

$75.32

In stock

Need project or contract pricing?

Request project pricing

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The MikroTik S+RJ10 is an SFP+ module with an RJ45 port that brings up to 10 Gbps over regular twisted-pair cable to devices with SFP+ ports. It supports 10M, 100M, 1G, 2.5G, 5G and 10G link rates, so an SFP+ cage can connect to copper equipment without optical fiber.

MikroTik lists a distance of up to 30 m at 10 Gbps and a tested ambient range of -20 to 60 °C. The module is aimed at MikroTik devices with active cooling; it is supported on passively cooled devices but may need extra cooling there. The latest revision, marked /r2 at the end of the serial number, adds jumbo frames up to 10218 bytes at 2.5, 5 and 10 Gbps, corrected link speed reporting and DDM monitoring of supply voltage and module temperature.

  • Best for: connecting SFP+ switch or router ports to 10G, 5G, 2.5G or Gigabit copper Ethernet devices.
  • System fit: MikroTik devices with SFP+ ports, mainly those with active cooling.
  • Important to know: reach at 10 Gbps is up to 30 m; in passively cooled devices the module may need extra cooling, and MikroTik advises using it in every second SFP+ cage on some switches.

Why teams choose it

Built for reliable networks

  • Six link rates

    10M, 100M, 1G, 2.5G, 5G and 10G over RJ45.

  • No fiber needed

    turns an SFP+ cage into a copper Ethernet port.

  • Jumbo frames on r2

    up to 10218 bytes at 2.5, 5 and 10 Gbps.

  • DDM on r2

    supply voltage and module temperature monitoring.

Specifications

Technical specifications

General
Brand MikroTik
Model S+RJ10
Device Type SFP+ to RJ45 copper module
Form Factor SFP+
Interfaces
Connector RJ45
Ethernet Ports 1x 10G RJ45
Supported Speeds 10M, 100M, 1G, 2.5G, 5G, 10G
Performance
Data Rate Up to 10 Gbps
Reach Up to 30 m at 10 Gbps
Cable Length 10GBASE-T 30 m, Cat6/7
Cable Length 5GBASE-T 100 m, Cat5e/6
Cable Length 2.5GBASE-T 100 m, Cat5e/6
Cable Length 1000BASE-T 100 m, Cat5e/6
Cable Length Between Two S+RJ10 200 m at 1000BASE-T, Cat5e/6
Jumbo Frames Up to 10218 bytes at 2.5, 5 and 10 Gbps, r2 revision
DDM/DOM Supply voltage and temperature, r2 revision
Power
Power Consumption 2.4 W max, 10GBASE-T, 30 m link
Physical
Storage 256 KB flash
PHY Chip Marvell 88X3310P
Environmental
Operating Temperature -20 to 60 °C (tested ambient)
Cooling Note Made for actively cooled devices; passive devices may need extra cooling
MTBF About 100,000 hours at 25 °C