MikroTik XS+31LC10D 1G/10G/25G SFP28 Module, 1310 nm Single-Mode, 10 km, Dual LC

MikroTik · Transceivers

MikroTik XS+31LC10D 1G/10G/25G SFP28 Module, 1310 nm Single-Mode, 10 km, Dual LC

Part number / SKU
XS+31LC10D
  • 1G / 10G / 25G
  • SFP28, also SFP and SFP+

Works with: MikroTik CCR2004-1G-12S+2XS router Confirmed by the manufacturer

$157.81

In stock

Need project or contract pricing?

Request project pricing

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The MikroTik XS+31LC10D is a combined 1G SFP, 10G SFP+ and 25G SFP28 optical module for single-mode fiber at 1310 nm. MikroTik made it as the upgrade of its earlier 10G SFP+ 10 km module, adding 25G SFP28 support so one module type can serve SFP, SFP+ and SFP28 ports.

It uses a dual LC UPC connector and reaches up to 10 km. MikroTik lists average optical output power of -7.0 to 2.0 dBm and receiver sensitivity of -12.0 dBm OMA, and an MTBF of about 200,000 hours at 25 °C. MikroTik names it for the CCR2004-1G-12S+2XS router and other multiport devices, and states the units also work in non-MikroTik SFP devices.

  • Best for: 1G, 10G or 25G single-mode fiber links up to 10 km between routers and switches.
  • System fit: SFP, SFP+ and SFP28 ports on MikroTik devices such as the CCR2004-1G-12S+2XS; MikroTik states it is also compatible with non-MikroTik SFP devices.
  • Important to know: the far end needs a matching 1310 nm single-mode module running at the same data rate.

Why teams choose it

Built for reliable networks

  • Three speeds in one module

    runs at 1G, 10G or 25G.

  • Single-mode reach

    up to 10 km at 1310 nm over a dual LC UPC connection.

  • Fits mixed port types

    works in SFP, SFP+ and SFP28 cages.

  • Long rated life

    MTBF of about 200,000 hours at 25 °C.

Specifications

Technical specifications

General
Brand MikroTik
Model XS+31LC10D
Device Type Optical transceiver
Form Factor SFP28, also SFP and SFP+
Optical
Data Rate 1G / 10G / 25G
Wavelength 1310 nm
Fiber Type Single-mode
Reach Up to 10 km
Connector Dual LC UPC
Tx Output Power -7.0 to 2.0 dBm average
Rx Sensitivity -12.0 dBm OMA
LOS Deassert -15 dBm average
LOS Assert -30 dBm average
LOS Hysteresis 0.5 to 5.0 dB
Interfaces
Rx Output Internally AC coupled, needs 100 ohm differential termination at host
Host Interface SFF-8419 LOS signaling
Physical
MTBF About 200,000 hours at 25 °C