Mimosa 100-00084 N5-45x4 Sector Antenna 4.9-6.4 GHz 4-Port 22dBi

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐓𝐈𝐓𝐋𝐄
Mimosa N5-45x4 100-00084 4-Port Sector Antenna 4.9–6.4 GHz 22 dBi

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐎𝐕𝐄𝐑𝐕𝐈𝐄𝐖
Mimosa N5-45x4 is a 4-port, dual-slant 45° sector antenna operating from 4.9–6.4 GHz. Designed for the Mimosa A5c 4x4 MIMO radio, it provides 22 dBi antenna gain, beamforming support, a 43 dB minimum front-to-back ratio, and wideband outdoor operation.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐓𝐘𝐏𝐄
Antennas (Networking)

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
𝐊𝐄𝐘 𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒
• Wideband 4.9–6.4 GHz operation
• 4-port antenna architecture
• 22 dBi antenna gain with +3 dBi gain from beamforming when paired with the Mimosa A5c
• Dual-slant 45° polarization
• 43 dB minimum front-to-back ratio
• Designed for beamforming with the Mimosa A5c 4x4 MIMO access point
• 9° elevation beamwidth and 42° 3 dB azimuth beamwidth
• Supports two concurrent third-party 2x2 MIMO radios operating on separate channels
• Side-lobe and front-to-back noise rejection designed for tower and collocation environments
• Supports 4.9 GHz public safety applications and licensed multipoint operation up to 6.4 GHz where regulations allow
• Outdoor UV-stabilized engineered polymer enclosure
• IP55 outdoor ingress protection rating
• Galvanized steel dual-attached pole mounting system with mechanical tilt adjustment
• Wind survivability rated to 200 km/h (125 mph)

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
𝐓𝐄𝐂𝐇𝐍𝐈𝐂𝐀𝐋 𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒
• Brand: Mimosa
• Model: N5-45x4
• Part Number: 100-00084
• Frequency Range: 4.9–6.4 GHz
• Antenna Gain: 22 dBi (+3 dBi from beamforming)
• Polarization: Dual-slant 45°
• Azimuth Beamwidth (4 dB): 45°
• Azimuth Beamwidth (3 dB): 42°
• Elevation Beamwidth (3 dB): 9°
• Electrical Downtilt: 2°
• Front-to-Back Ratio: 43 dB minimum
• Cross-Polar Isolation: >30 dB
• Port-to-Port Isolation: >10 dB
• Impedance: 50 Ω
• Maximum Input Power: 30 dBm
• RF Connectors: 4 N-type female
• RF Connector Position: Back of antenna, near center
• Included RF Cables: Four 1-meter LMR 240 Type-N to Type-N cables
• Dimensions Including Connectors: 734 x 143 x 76 mm (28.88 x 6.63 x 3.0 in)
• Weight: 2.81 kg (6.2 lb)
• Enclosure: Outdoor, UV-stabilized engineered polymer
• Mounting: Galvanized steel dual-attached pole mount
• Mechanical Tilt: 20° up or down
• Mounting Brackets: Two included
• Supported Pole Diameter: 38–90 mm (1.5–3.5 in)
• Wind Survivability: 200 km/h (125 mph)
• Wind Loading: 4.77 kg at 160 km/h (10.49 lb at 100 mph)
• Environmental Ingress Protection Rating: IP55

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
𝐈𝐍𝐓𝐄𝐍𝐃𝐄𝐃 𝐔𝐒𝐄 / 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒
• Outdoor wireless networking links
• Point-to-point or point-to-multipoint deployments
• Pole, mast, or tower installations with compatible equipment