Notifier B300-6-BP (10-Pack) 6" Low-Profile Detector Base

Notifier · Fire Alarm

Notifier B300-6-BP 6 in Flanged Detector Base, 10-Pack

Part number / SKU
B300-6-BP
  • 6 in plug-in detector base
  • 4 in square
  • 15 to 32 VDC
  • UL 268

Works with: RA100Z remote annunciator, Compatible intelligent plug-in sensors (System Sensor Base/Sensor Cross Reference Chart), NFS2-640 (B300-6-IV listed option) Confirmed by the manufacturer

$83.74

In stock

Warranty
Manufacturer warranty

Need project or contract pricing?

Request project pricing

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The B300-6-BP is a 6 in flanged plug-in detector base for intelligent addressable smoke and heat sensors. This listing is a pack of 10 bases. It carries power and communication for the detector head over two terminals and has a third terminal for an RA100Z remote annunciator.

The base runs on 15 to 32 VDC with a standby current of 170 uA and measures 6.1 in in diameter and 0.76 in high. It mounts to 4 in square boxes with or without plaster ring, 4 in and 3-1/2 in octagon boxes and single-gang boxes. Signal wiring should be 18 AWG or larger, and wire up to 12 AWG can be used. A breakable tab turns on a tamper-resist feature for the detector head.

  • Best for: mounting compatible intelligent plug-in detector heads on standard electrical boxes.
  • System fit: compatible intelligent plug-in sensors per the System Sensor base/sensor cross reference; Notifier lists the B300-6-IV with the NFS2-640.
  • Important to know: installation and programming must be done by a qualified fire alarm technician in line with local code and the panel manufacturer's instructions.

Why teams choose it

Built for fire alarm systems

  • Low standby draw

    170 uA at 15 to 32 VDC.

  • Remote annunciator terminal

    connects an RA100Z between terminals 1 and 3.

  • Wide box fit

    mounts to 4 in square, octagon and single-gang boxes.

  • Tamper resist

    a breakable tab locks the detector head to the base.

Specifications

Technical specifications

General
Brand Notifier (System Sensor)
Model B300-6-BP
Device Type 6 in plug-in detector base
Device Type Detail Intelligent, flanged
Mount Type 4 in square
Mount Type Detail With or without plaster ring; 4 in octagon, 3-1/2 in octagon, single-gang box
Terminals 1 Power (-) and RA (-); 2 Power (+); 3 RA (+)
Communication Over power (+/-) lines
Remote Annunciator RA100Z between terminals 1 and 3
Tamper Resist Breakable tab; lever release for removal
Pack Quantity 10 bases
Electrical
Operating Voltage 15 to 32 VDC
Standby Current 170 uA
Wire Gauge 18 AWG minimum signal wiring; up to 12 AWG
Physical
Diameter 6.1 in (155 mm)
Height 0.76 in (19 mm)
Environmental
Operating Temperature Per installed sensor (Base/Sensor Cross Reference Chart)
Listings and Approvals
Agency Approvals UL 268