Teltonika RUT360 LTE CAT6 Industrial Cellular Router 300Mbps WiFi4

PRODUCT OVERVIEW

Teltonika RUT360 LTE CAT6 Router WiFi4 1 10/100 Uplink 1 10/100 Lan Port

PRODUCT TYPE

Routers and Switches

KEY FEATURES

• 4G LTE CAT 6 Cellular speeds up to 300Mbps with Carrier Aggregation
• WI-FI 802.11 b/g/n Wireless Access Point with Hotspot functionality
• WAN FAILOVER Automatic switching to available Backup connection
• RMS For remote management, access & VPN services
• 100 x 30 x 85 mm
• 247 g
• FEATURES Mobile module: 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mb
• Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation
• Multiple PDN: Possibility to use different PDNs for multiple network access and services
• Band management: Band lock, Used band status display
• Bridge: Direct connection (bridge) between mobile ISP and device on LAN
• Passthrough: Router assigns its mobile WAN IP address to another device on LAN
• WIRELESS Wireless mode: 802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA)
• Wi-Fi security: WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
• SSID/ESSID: ESSID stealth mode
• Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd
• NETWORK Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
• VoIP pass through support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

TECHNICAL SPECIFICATIONS

• Brand: Teltonika
• Model: RUT360
• Product Type: Routers and Switches
• 4G LTE CAT 6 Cellular speeds up to 300Mbps with Carrier Aggregation
• WI-FI 802.11 b/g/n Wireless Access Point with Hotspot functionality
• WAN FAILOVER Automatic switching to available Backup connection
• RMS For remote management, access & VPN services
• 100 x 30 x 85 mm
• 247 g
• FEATURES Mobile module: 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mb
• Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation
• Multiple PDN: Possibility to use different PDNs for multiple network access and services
• Band management: Band lock, Used band status display
• Bridge: Direct connection (bridge) between mobile ISP and device on LAN
• Passthrough: Router assigns its mobile WAN IP address to another device on LAN
• WIRELESS Wireless mode: 802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA)
• Wi-Fi security: WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
• SSID/ESSID: ESSID stealth mode
• Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd
• NETWORK Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
• VoIP pass through support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
• Firewall: Port forward, traffic rules, customs rules
• QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
• Network backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
• Load balancing: Balance Internet traffic over multiple WAN connections
• SSHFS: Possibility to mount remote file system via SSH protocol
• ETHERNET
• WAN: 1 x WAN port 10/100 Mbps, complies with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• LAN: 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
• SECURITY Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
• Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
• Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

INTENDED USE / APPLICATIONS

• Professional networking and communications deployments
• Commercial, institutional, or industrial installations
• Use with compatible equipment according to manufacturer specifications