Tycon TP-DC-1256G-VHP 70W 56VDC PoE Injector 5 Gigabit Dual Input
- EhubAmerica SKU
- TP-DC-1256G-VHP
In stock
- Warranty
- Manufacturer warranty
Need project or contract pricing?
Request project pricing- Help in English, Spanish and Portuguese
- 30-day returns
Not sure it fits your system? Check compatibility
Overview
What it is and who it is for
PRODUCT OVERVIEW
Tycon TP-DC-1256G-VHP DC-to-DC converter and 4-pair passive PoE inserter with 10-60VDC input, 56VDC/70W output, dual DC inputs, isolated design, and up to 5 Gigabit data throughput.
PRODUCT TYPE
PoE & Power Injectors
KEY FEATURES
• DC-to-DC converter with integrated passive PoE inserter
• Wide 10VDC to 60VDC input voltage range
• Regulated 56VDC PoE output
• Maximum 70W output power
• Maximum 1.25A total output current
• 8-wire, 4-pair passive PoE output
• Up to 5 Gigabit data throughput
• Dual DC inputs support connection of two power sources
• Isolated input-to-output design supports negative-ground or positive-ground systems
• Low-voltage disconnect conserves battery power
• Overcurrent, short-circuit, reverse-polarity, and surge protection
• Metal housing
• DIN rail mounting adapters included
• Industrial operating temperature range
TECHNICAL SPECIFICATIONS
• Manufacturer: Tycon
• Model / Part Number: TP-DC-1256G-VHP
• Product Type: DC-to-DC Converter / Passive PoE Inserter
• Input Voltage: ±10VDC to 60VDC
• DC Input Connector: Removable screw-type compression wire terminal, 5-pin
• Maximum Input Wire Gauge: 12 AWG
• PoE Specification: Passive, 8-wire / 4-pair
• Passive PoE Pinout: Pins 1, 2, 4, 5 positive; pins 3, 6, 7, 8 negative
• Output Voltage: 56VDC ±2.5%
• Maximum Output Current: 1.25A total
• Maximum Output Power: 70W total
• Data Rate: Up to 5 Gigabit
• Data Input / PoE Output Connectors: Shielded RJ45
• Self-Consumption: 2W
• Efficiency: 85% minimum at full load
• Line Regulation / Ripple / Noise: 1%
• Load Regulation: 5%
• Low-Voltage Protection: Approximately 8-9VDC shutdown
• Protections: Overcurrent, short circuit, reverse polarity, surge protection
• Overcurrent Protection: 110% of rated output
• EMC Standards: EN55032 / EN55035
• Safety Standard: EN62368-1
• Operating Temperature: -40°C to +70°C (-40°F to +158°F)
• Storage Temperature: -40°C to +85°C (-40°F to +185°F)
• Operating Humidity: 5% to 90% RH
• MTBF: 96,022 hours
• Dimensions: 86 x 139 x 40 mm (3.4 x 5.5 x 1.57 in.)
• Weight: 550 g (19.4 oz.)
• Enclosure: Metal
• DIN Rail Adapters: Included
• Manufacturer Warranty: 3 years
INTENDED USE / APPLICATIONS
• 12VDC and 24VDC remote power systems
• 48VDC or -48VDC remote power systems
• Ubiquiti airFiber antenna systems
• High-power 4-pair PoE cameras and radios
• Battery-powered remote installations
Specifications
Technical specifications
| General | |
|---|---|
| Model | TP-DC-1256G-VHP |
| Brand | Tycon |
| Product Type | DC to DC Converter / PoE Injector |
| Application | Ubiquiti airFiber antennas, Axis High Power PoE PTZ security cameras, high power passive/active PoE systems |
| Physical | |
| Dimensions | 86 x 139 x 40 mm (3.4 x 5.5 x 1.57 in) |
| Weight | 550 g (19.4 oz) |
| Housing | Metal |
| Mounting | DIN Rail mounting kit included |
| Power & Electrical | |
| Input Voltage Range | 10VDC to 60VDC |
| Input Configuration | Dual DC inputs (2 power sources) |
| DC Input Connector | Removable screw type compression wire terminal, 5 pin (12 AWG max) |
| Output Voltage | 56VDC ±2.5% |
| Output Power (max) | 70W total |
| Output Current (max) | 1.25A total |
| Self-Consumption Power | 2W |
| Efficiency | 85% minimum (at 10V) |
| Operating Temperature Range | -40°C to 70°C |
| Low Voltage Protection | ~8–9VDC (unit powers down to conserve battery) |
| Overcurrent Protection | 110% of rated |
| Additional Protections | Short circuit, reverse polarity, surge protection |
| Networking & Connectivity | |
| PoE Output Specification | Passive (8 wire, 4 pair) 1245V+, 3678V- |
| PoE Output Connector | RJ45 (shielded) |
| Data Throughput | Up to 5 Gigabit |
| LED Indicators | Left LED (pins 1,2,3,6 powered), Right LED (pins 4,5,7,8 powered), STB LED (red = PoE output off), PSE LED (green = PoE output on) |