Tycon TP-SW5G-D+ 5-Port Gigabit 802.3bt/at PoE Switch 100W

PRODUCT OVERVIEW

The TP-SW5G-D+ (formerly part number TP-SW5GD-BT) Power over Ethernet (PoE) 5 Port Gigabit switch offered by Tycon is a fully automatic high speed Layer 2 Ethernet switch with one 802.3bt PoE input and four 802.3at PoE outputs . Ports 1-4 are 802.3at 35W PoE Out . The Uplink Port 5, is 802.3bt compatible so the switch can accept up to 100W PoE on 4 pairs to power the switch and connected devices remotely over CAT5 or higher Ethernet Cable . The Ethernet spec supports distances up to 100m (328ft) . By using as a repeater, 200m total distance is realistic.

PRODUCT TYPE

Routers and Switches

KEY FEATURES

• Triple Power Inputs: 802.3bt PoE, Wire Terminal, 4 Pin DIN
• Gigabit Compatible
• Built-in Surge Protection
• Automatic MDI/MDI-X Crossover
• Automatic Speed and Duplex Sensing
• Low Self Power and High Temperature Operation
• DIN Rail Adapters included
• Power 4 802.3at devices from an 802.3bt PoE Input
• Remote or Local Power for Cameras and Wireless Radios
• Functions as Ethernet/PoE repeater
• PoE Lighting Applications
• 159 x 118 x 40mm (6.3 x 4.6 x 1.6”)
• 318g (11oz)
• Ports: Port 1-4: 802.3at Mode B (4,5 +; 7,8 -) ; Port 5: UPLINK 802.3bt Compatible PoE Input (also accepts 802.3at or Passive PoE)
• Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
• Data/PoE Connections: Shielded RJ45, Grounded to FG connection
• Input Voltage: Vin 44VDC to 57VDC on Wire Terminal or 4 Pin DIN or 802.3bt PoE on port 5
• PoE Protections: Over Temperature, Over Current, Short Circuit

TECHNICAL SPECIFICATIONS

• Brand: Tycon
• Model: TP-SW5G-D+
• Product Type: Routers and Switches
• Triple Power Inputs: 802.3bt PoE, Wire Terminal, 4 Pin DIN
• Gigabit Compatible
• Built-in Surge Protection
• Automatic MDI/MDI-X Crossover
• Automatic Speed and Duplex Sensing
• Low Self Power and High Temperature Operation
• DIN Rail Adapters included
• Power 4 802.3at devices from an 802.3bt PoE Input
• Remote or Local Power for Cameras and Wireless Radios
• Functions as Ethernet/PoE repeater
• PoE Lighting Applications
• 159 x 118 x 40mm (6.3 x 4.6 x 1.6”)
• 318g (11oz)
• Ports: Port 1-4: 802.3at Mode B (4,5 +; 7,8 -) ; Port 5: UPLINK 802.3bt Compatible PoE Input (also accepts 802.3at or Passive PoE)
• Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
• Data/PoE Connections: Shielded RJ45, Grounded to FG connection
• Input Voltage: Vin 44VDC to 57VDC on Wire Terminal or 4 Pin DIN or 802.3bt PoE on port 5
• PoE Protections: Over Temperature, Over Current, Short Circuit
• Surge Protection: IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns)
• Self Consumption: < 3 Watt Typical
• Switch Technology: Store and Forward, automatic MDI/MDI-X crossover
• Protocol: CSMA/CD
• Flow Control: IEEE802.3x(full-duplex), Back Pressure(half-duplex)
• Data Transmission Rate: 1488000pps , 148800pps, 14880pps ; Automatic speed and duplex sensing
• Address Table: 2K MAC, self-learning
• Operating Temp: -30 to +70°C (-22 to 158°F)
• Operating Humidity (RH): 5% - 90% (non condensing)
• Storage Temperature: -40 to +85°C (-40 to +185°F)

INTENDED USE / APPLICATIONS

• Professional networking and communications deployments
• Commercial, institutional, or industrial installations
• Use with compatible equipment according to manufacturer specifications