Ubiquiti F-POE-G2 Optical Data Transport for Outdoor PoE Devices

PRODUCT OVERVIEW

Ubiquiti FiberPoE Gen 2 provides Gigabit fiber-to-Ethernet data transport with 24V/50V passive PoE support for outdoor deployments, featuring enhanced ESD, EMI, and surge protection.

PRODUCT TYPE / CATEGORY

Networking
Fiber

KEY FEATURES

• Gigabit bi-directional fiber-to-Ethernet data transport
• Designed for outdoor PoE device deployments
• Supports 1G SFP modules
• Supports 24V and 50V passive PoE transport
• Separates fiber data transport from DC power for long-distance installations
• Can operate as a fiber-to-Ethernet converter
• Two F-POE-G2 devices can be used to create a fiber bridge
• Built-in high-current Gas Discharge Tube surge protection
• Enhanced ESD/EMP protection rated at ±24kV contact/air for Ethernet
• Fiber transport reduces susceptibility to electromagnetic interference
• Integrated fiber cable strain relief system
• Weatherproof form factor

TECHNICAL SPECIFICATIONS

• Brand: Ubiquiti
• Model / Part Number: F-POE-G2
• Product Family: FiberPoE Gen 2
• Dimensions: 196.4 × 93.5 × 32.4 mm (7.73 × 3.68 × 1.28 in)
• Weight: 288 g (10.2 oz)
• Enclosure: White Polycarbonate
• SFP Interface: (1) 1 Gbps SFP Port
• DC Interface: (1) DC Terminal Block
• DC Injection Interface: (1) DC RJ45 Port
• PoE Interface: (1) 1000 Mbps Ethernet PoE Port
• Typical Power Consumption: 1.5W
• Input DC Voltage: 16–57V
• DC Terminal Block Power: 2-wire, 24VDC or 50VDC
• DC In RJ45: 2-pair 24VDC input or 4-pair 24VDC/50VDC passthrough
• PoE RJ45: 2-pair 24VDC input or 4-pair 24VDC/50VDC PoE passthrough
• PoE Output: 2-pair 24VDC or 4-pair 24VDC/50VDC
• DC Output: Terminal block, 2-wire, 24VDC or 50VDC
• Surge Protection: Built-in high-current Gas Discharge Tube for DC terminal block and PoE port
• LED: White – Power On; Blue – Connected; Flashing Blue – Activity
• Operating Temperature: -40 to 60°C (-40 to 140°F)
• Operating Humidity: 10 to 95% noncondensing
• ESD/EMP Protection: ±24kV contact/air for Ethernet
• Certifications: CE, FCC, IC
• Ethernet Requirement: 1000 Mbps; 10/100 Mbps Ethernet is not supported
• SFP Operating Note: Operating temperature may be further restricted by the temperature range of the installed SFP module

INTENDED USE / APPLICATIONS

• Outdoor installations requiring long-distance data runs to PoE devices
• Fiber-to-Ethernet conversion between fiber optic and twisted-pair Ethernet connections
• Fiber bridge deployments using two F-POE-G2 devices
• Installations requiring reduced EMI and ESD exposure compared with typical long-distance copper Ethernet runs
• Tower installations using separate fiber data and DC power transport