RF connectors, adapters,and cable assemblies.
BNC, N-type, SMA, TNC, UHF, mini-UHF, F-type, FME, and 7/16 DIN connectors and adapters, custom and pre-made cable assemblies, and jumpers for RF integration, tower work, broadcast, cellular, and government applications. Stocked in Miami and ready to ship.
About RF Industries
A US connector and cable assembly specialist with deep coverage.
RF Industries is a US manufacturer of RF connectors, adapters, cable assemblies, and jumpers, covering the broadest practical range of connector families used in RF integration, tower work, broadcast, cellular infrastructure, and government deployments. The portfolio includes BNC, N-type (male, female, reverse-polarity), SMA (standard and reverse-polarity), TNC, UHF (PL-259, SO-239), mini-UHF, F-type, FME, and 7/16 DIN in straight, right-angle, bulkhead, and panel-mount configurations, along with the matching adapters between any two connector families.
EhubAmerica stocks the most-requested RF Industries SKUs in our Doral, FL warehouse: the BNC, N-type, SMA, TNC, UHF, and 7/16 DIN connector families across the common cable type fits (RG-58, RG-8, RG-213, LMR-195, LMR-240, LMR-400, LMR-600), adapter assortments for connector-to-connector conversion, and pre-made cable assemblies in standard lengths. For custom cable assemblies (specific lengths, specific connector combinations, sweep-tested), we work with RF Industries direct on a per-quote basis with typical turnaround of 5-10 business days.
The RF Industries lineup is the practical choice for RF integrators terminating cable runs on tower or in-rack installs, broadcast engineers building studio-to-transmitter or short patch jumpers, cellular and DAS integrators specifying 7/16 DIN connectors for low-PIM applications, government and military RF buyers sourcing US-made connectors with documented manufacturing, and amateur radio operators upgrading from generic connectors to commercial-grade. Cable jumper assemblies are particularly common for in-shelter and in-cabinet runs where pre-made saves field labor.
Product lines we stock
Our active RF Industries catalog sorts into four practical categories. Connectors BNC, N-type, SMA, TNC, UHF (PL-259, SO-239), mini-UHF, F-type, FME, and 7/16 DIN in all common cable fits and gender configurations. Adapters connector-to-connector conversion (N to BNC, SMA to BNC, N to UHF, and dozens of other combinations) in straight, right-angle, and barrel forms. Pre-made cable assemblies standard-length jumpers in RG-58, RG-8, LMR-195, LMR-240, LMR-400 with various connector combinations. Custom cable assemblies made-to-order with specified length, connector combination, and optional sweep testing for critical RF paths.
Why EhubAmerica
Four reasons RF integrators choose us for RF Industries.
Stocked
Real RF Industries inventory in our Doral, FL warehouse: BNC, N-type, SMA, TNC, UHF, 7/16 DIN connectors, adapters, and pre-made jumpers across common cable types.
Custom assemblies
Custom cable assemblies made-to-order: specified length, connector combination, cable type, optional sweep testing. Typical turnaround 5-10 business days.
Supported
Engineering desk for connector identification, gender and polarization confirmation, cable type to connector compatibility, and bundled kit recommendations for fleet installs.
Backed
48-hour RMA replacement window on warrantied units. RF Industries manufacturer warranty honored through us for in-warranty cases.
Frequently asked
RF Industries questions, connector answers.
Specific to RF integrators, tower crews, broadcast engineers, cellular DAS integrators, government RF buyers, and amateur radio operators sourcing connectors, adapters, or custom cable assemblies.
Do you stock RF Industries connectors in Miami?
Yes. We stock BNC, N-type (male, female, reverse-polarity), SMA (standard and RP), TNC, UHF (PL-259, SO-239), mini-UHF, F-type, FME, and 7/16 DIN connectors in the common cable type fits (RG-58, RG-8, RG-213, LMR-195, LMR-240, LMR-400, LMR-600). We also stock the matching adapters and pre-made jumper assemblies. Most in-stock orders ship same-day when placed before 2 PM ET.
Can you make custom cable assemblies?
Yes. Custom cable assemblies are quoted per-order with specified length (we can do from short patch jumpers to long tower runs), connector combination (any of the standard families on either end), and cable type (LMR-195 through LMR-600 plus specialty cables). Optional sweep testing is available for critical RF paths where return loss and insertion loss documentation is required. Typical turnaround is 5-10 business days for custom builds. Send us the spec and we quote.
Which RF Industries connector fits LMR-400 cable?
LMR-400 has specific connector fits across all the common connector families. For example: N-male for LMR-400 (RFN-1006-L400 or similar), N-female for LMR-400, BNC for LMR-400, TNC for LMR-400, 7/16 DIN for LMR-400, UHF PL-259 for LMR-400. Tell us the connector family (N, BNC, etc.), the gender (male or female), and the install type (crimp, clamp, solder) and we point you to the right SKU. Crimp connectors are most common in production installs for reliability.
What is the difference between SMA and Reverse-Polarity SMA (RP-SMA)?
Standard SMA has a male pin on the male connector and a socket on the female. Reverse-Polarity SMA (RP-SMA) reverses the gender of the pin and socket on the male and female connectors while keeping the threading and outer body the same. RP-SMA is required by FCC for some consumer wireless equipment (legacy WiFi APs and antennas) to discourage cross-connection with non-certified high-gain antennas. For commercial and amateur applications, standard SMA is most common. Match the connector standard to what your equipment requires.
Do you sell connectors and cable as kits for fleet installs?
Yes. For fleet installs (mobile radio NMO antenna installs, tower rollouts, repeater commissioning), we can bundle connectors plus cable plus weatherproofing into per-install kits. Send us the unit count, the connector and cable spec, and any optional items (heat shrink, weatherproofing tape, ground kits) and we come back with bundled pricing. This is common for trucking fleet rollouts and public safety vehicle batches.
What is the RF Industries RMA process at EhubAmerica?
Send the connector, adapter, or cable assembly with a brief problem description and the original order or invoice reference. We issue replacement within 48 hours of receipt for units under warranty. RF Industries manufacturer warranty covers manufacturing defects on connectors and assemblies. Warranty does not cover damage from over-tightened mating (a common installation issue), incorrect cable preparation before connector installation, or impact damage.
Let us quote your RF Industries order.Same-day response.
Send us the project: connector families and quantities, cable type fit, adapter list, or custom cable assembly spec (length, connector combination, sweep test requirement). We come back with stock confirmation, lead time, pricing, and bundled kit options for fleet rollouts.