Cambium Networks C050900C505B ePMP Force 130 5GHz Point-to-Multipoint

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐓𝐈𝐓𝐋𝐄
Cambium Networks C050900C505B ePMP Force 130 5 GHz Point-to-Multipoint

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐎𝐕𝐄𝐑𝐕𝐈𝐄𝐖
Cambium Networks ePMP Force 130 5 GHz subscriber module with 2x2 MIMO/OFDM, integrated 14 dBi flat-panel antenna, up to 140 Mbps throughput, 10/100 Base-T Ethernet, and 24V input. 

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐓𝐘𝐏𝐄 / 𝐂𝐀𝐓𝐄𝐆𝐎𝐑𝐘
Networking
Point-to-Multipoint Systems

𝐊𝐄𝐘 𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒
• 5 GHz ePMP subscriber module
• Up to 140 Mbps throughput with bi-directional real-user data traffic
• 2x2 MIMO/OFDM physical layer
• Integrated 14 dBi flat-panel antenna
• Configurable 5, 10, 20, and 40 MHz channel widths
• Configurable modes for symmetrical and asymmetrical traffic
• Round-trip latency as low as 2–3 ms
• Three-level QoS traffic priority for voice, high, and low priority traffic
• Compatible with ePMP 1000 and ePMP 2000 Access Points
• Interoperates with ePMP 3000 in backwards-compatible 802.11n mode
• Supports pole and wall mounting
• Integrated 1 Joule surge suppression

𝐓𝐄𝐂𝐇𝐍𝐈𝐂𝐀𝐋 𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒
• Manufacturer: Cambium Networks
• Model: ePMP Force 130
• Part Number: C050900C505B
• Frequency Range: 5150–5970 MHz
• Channel Spacing: Configurable in 5 MHz increments
• Channel Width: 5 / 10 / 20 / 40 MHz
• MAC Layer: Cambium Proprietary
• Physical Layer: 2x2 MIMO/OFDM
• Ethernet Interface: 10/100 Base-T
• Protocols: IPv4, IPv6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPS, STP, SSH, 24V PoE, IGMP Snooping
• Network Management: HTTPS, SNMPv2c, SSH
• VLAN: 802.1Q with 802.1p priority
• ARQ: Yes
• Modulation: MCS0 (BPSK) to MCS15 (64QAM 5/6), adaptive
• Transmit Power Range: 0–28 dBm combined, subject to regional EIRP limits
• Antenna Type: Flat Panel
• Antenna Gain: 14 dBi
• 3 dB Beamwidth, Azimuth: 45°
• 3 dB Beamwidth, Elevation: 15°
• Environmental Rating: IP55
• Operating Temperature: -30°C to +55°C (-22°F to +122°F)
• Dimensions: 235 x 77 x 58 mm
• Weight: 0.35 kg (0.88 lb)
• Wind Survival: 125 km/h (78 mph)
• Pole Diameter Range: 3.8–6.4 cm (1.5–2.5 in)
• Power Consumption: 8 W maximum, 5 W typical
• Input Voltage: 24 V
• Encryption: 128-bit AES (CCMP mode)

𝐈𝐍𝐓𝐄𝐍𝐃𝐄𝐃 𝐔𝐒𝐄 / 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒
Designed as a subscriber module for wireless service provider and enterprise broadband deployments, including operation in high-interference RF environments.