Comtrend WAP-EN1200C AC1200 Wireless Access Point PoE Gigabit

PRODUCT OVERVIEW

Comtrend’s WAP-EN1200C Wireless Access Point combines 400mW high power and -95dBm high sensitivity to deliver flawless wireless coverage to the entire home/business.

PRODUCT TYPE

Wireless Access Points

KEY FEATURES

• Easily setup Guest Networks to isolate the local network from the wireless clients via an IP filter
• Dedicate one access point as the controller and manage up to five other access points
• Manage the handoff of client devices from one access point to another with negligible interruption
• LAN Interface: Gigabit x 1
• PoE: 802.3af (Supports 802.3at)
• Antenna: Type: 4 x Built-In PIFA (2 x 2.4GHz, 2 x 5GHz) / Gain: 2.82dBi (2.4GHz), 4 dBi (5GHz) Max.
• Power: DC: 12V/ 1A 802.3af (PoE Optional)
• Power saving: 802.3az
• Internal buzzer: Yes
• Frequency band: Radio I: 802.11b/g/n 2.412~2.484(GHz)
• Radio II: 802.11a/n/ac 5.18~5.24(GHz), 5.26~5.32(GHz), 5.5~5.7(GHz), 5.745~5.825(GHz)
• Operation Channels: 2.4GHz: US/Canda 1-11; 5GHz: Country dependent for the following ranges: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
• Transmit Power 802.11b @ 23dBm | 802.11a @ 23 dBm
• 802.11g @ 23dBm | 802.11an @ 26dBm
• 802.11gn @ 26dBm | 802.11ac @ 26dBm
• Receiver Sensitivity 802.11b @ ≤ -95dBm | 802.11a @ ≤-89dBm
• 802.11g @ ≤ -91dBm | 802.11an @ ≤-92dBm
• 802.11gn @ ≤ -93dBm |802.11ac @ ≤-86dBm

TECHNICAL SPECIFICATIONS

• Brand: Comtrend
• Model: WAP-EN1200C
• Product Type: Wireless Access Points
• Easily setup Guest Networks to isolate the local network from the wireless clients via an IP filter
• Dedicate one access point as the controller and manage up to five other access points
• Manage the handoff of client devices from one access point to another with negligible interruption
• LAN Interface: Gigabit x 1
• PoE: 802.3af (Supports 802.3at)
• Antenna: Type: 4 x Built-In PIFA (2 x 2.4GHz, 2 x 5GHz) / Gain: 2.82dBi (2.4GHz), 4 dBi (5GHz) Max.
• Power: DC: 12V/ 1A 802.3af (PoE Optional)
• Power saving: 802.3az
• Internal buzzer: Yes
• Frequency band: Radio I: 802.11b/g/n 2.412~2.484(GHz)
• Radio II: 802.11a/n/ac 5.18~5.24(GHz), 5.26~5.32(GHz), 5.5~5.7(GHz), 5.745~5.825(GHz)
• Operation Channels: 2.4GHz: US/Canda 1-11; 5GHz: Country dependent for the following ranges: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
• Transmit Power 802.11b @ 23dBm | 802.11a @ 23 dBm
• 802.11g @ 23dBm | 802.11an @ 26dBm
• 802.11gn @ 26dBm | 802.11ac @ 26dBm
• Receiver Sensitivity 802.11b @ ≤ -95dBm | 802.11a @ ≤-89dBm
• 802.11g @ ≤ -91dBm | 802.11an @ ≤-92dBm
• 802.11gn @ ≤ -93dBm |802.11ac @ ≤-86dBm
• PHY rate: 1200Mbps (802.11ac 867Mbps, 802.11n 300Mbps)
• Concurrent clients: Up to 50 per radio
• Security Encryption: WEP/WPA/WPA2
• Has Wireless L2 Isolation, IEEE 802.1x Authenticator, and MAC Address Filer
• EAP Authentication: EAP-FAST/EAP-SIM/EAP-AKA
• Wireless mode: AP/WDS AP/ WDS Bridge
• 802.1q VLAN: Y (VID=1-4094)
• Spanning tree: RSTP
• QoS: WMM (802.11e) Max Associated Station No
• Pass-Through: IPv6 and VPN (PPTP, L2TP/IPsec)
• Multicast rate up to 54Mbps: Yes

INTENDED USE / APPLICATIONS

• Outdoor or indoor wireless networking, as specified
• Point-to-point or point-to-multipoint deployments where compatible
• Professional network installations