Gamewell · Fire Alarm

Gamewell-FCI ASD-PL3R Velociti Series 3 Addressable Photoelectric Smoke Sensor, Remote Test Capable for Duct Housings

Part number / SKU
ASD-PL3R
  • Photoelectric smoke sensor
  • Photoelectric
  • Addressable, Velociti protocol
  • Plug-in head
  • 15 to 32 VDC

Works with: E3 Series panels (Velociti and CLIP), S3 Series panels (Velociti and CLIP), GWF-7075 panel (Velociti only), B501 4 in flangeless base, B300-6 6 in flanged base, B200S intelligent sounder base and 9 more models Confirmed by the manufacturer


$86.99

Special order· Lead time confirmed by our team after you order.

Warranty
Manufacturer warranty

Free Economy shipping available at checkout

Need project or contract pricing?

Request project pricing
  • Help in English, Spanish and Portuguese

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The Gamewell-FCI ASD-PL3R is a Velociti Series 3 plug-in photoelectric smoke sensor in bright white. It sends an analog value of smoke density to Gamewell-FCI analog addressable panels over the signaling line circuit, and this version is remote test capable for use in DNR and DNRW duct housings.

The sensor runs on 15 to 32 VDC with a 200 uA standby current at 24 VDC, and its address is set on rotary decimal switches from 01 to 159. Dual LEDs give 360 degree visibility, a built-in test switch is operated with an external magnet, and sensitivity is programmed from the panel. It is rated 32 to 122 F for open area use, -4 to 158 F in duct applications, and air velocity from 0 to 4,000 ft/min.

The head mounts on the B501 4 in or B300-6 6 in base, or on optional sounder, relay and isolator bases. In DNR(W) duct housings, remote testing uses approved System Sensor test accessories, so no test coil is needed.

  • Best for: duct smoke detection in DNR or DNRW housings on Gamewell-FCI Velociti systems.
  • System fit: Gamewell-FCI analog addressable panels; E3 and S3 Series (Velociti and CLIP) and GWF-7075 (Velociti).
  • Important to know: installation and programming must be done by a qualified fire alarm technician per local code.

Why teams choose it

Built for fire alarm systems

  • Duct ready

    remote test capable for DNR and DNRW duct housings with no test coil needed.

  • Low standby load

    200 uA at 24 VDC per sensor.

  • Simple addressing

    rotary decimal switches set addresses 01 to 159.

  • Wide duct range

    rated -4 to 158 F and 0 to 4,000 ft/min air velocity in duct applications.

Specifications

Technical specifications

Ask about a spec
Product identifiers
SKUASD-PL3R
General
Brand Gamewell-FCI
Series Velociti Series 3
Model ASD-PL3R
Device Type Photoelectric smoke sensor
Device Type Detail Intelligent; remote test capable
Detection Type Photoelectric
Addressing Addressable, Velociti protocol
Addressing Detail Rotary decimal switches 01 to 159
Indicators Dual bi-color LEDs for 360 degree visibility; flash green when addressed, steady red in alarm
Test Method Built-in functional test switch activated by an external magnet
Sensitivity Programmable through the control panel software
Duct Use DNR and DNRW duct housings; remote test with approved System Sensor test accessories
Electrical
Operating Voltage 15 to 32 VDC
Standby Current 200 uA at 24 VDC (one communication every 5 seconds, green LED enabled)
Alarm Current 2 mA max at 24 VDC (one communication every 5 seconds, red LED enabled)
Maximum Current 4.5 mA at 24 VDC (one communication every 5 seconds, amber LED enabled)
Physical
Height 2.0 in (51 mm) installed in B300-6 base
Diameter 6.1 in (15.49 cm) installed in B300-6 base; 4 in (10.16 cm) installed in B501 base
Weight 3.4 oz (96.4 g)
Color Bright white
Mount Type Plug-in head
Mount Type Detail For B501, B300-6, sounder, relay or isolator bases
Environmental
Operating Temperature 32 to 122 F (0 to 50 C); -4 to 158 F (-20 to 70 C) in duct applications
Humidity 10% to 93% non-condensing
Air Velocity 0 to 4,000 ft/min (0 to 1219.2 m/min)
Listings and Approvals
Agency Approvals UL S2332; FM 3023594; MEA FDNY COA-219-02-E Vol. VI; CSFM 7272-1703:0501
Standards UL 268, 7th Edition; UL 268A; NFPA 72

Security projects · South Florida

Planning a fire alarm, access or camera project?

Send the site details and our team helps with product selection, a site survey and a project quote.

Start a project request