Inovonics · Intrusion & Alarm

Inovonics EN4204R EchoStream Four-Zone Add-On Receiver with Relay Outputs, 902 to 928 MHz

Part number / SKU
EN4204R

Works with: EN1215EOL universal transmitter, EN1215WEOL universal transmitter, EN1223D pendant transmitter, EN1235SF pendant transmitter, EN1235DF pendant transmitter, EN1244 transmitter and 6 more models Confirmed by the manufacturer


$185.99

In stock

Warranty
Manufacturer warranty

Need project or contract pricing?

Request project pricing
  • Help in English, Spanish and Portuguese

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The Inovonics EN4204R is an EchoStream four-zone add-on receiver that programs and supervises up to four Inovonics wireless transmitters. Five Form C relays (four alarm and one fault) let it connect to any hardwire control panel or work as a stand-alone wireless application.

Each output can be set to follower, latching, momentary or toggle mode, and relays are rated 1 A at 28 VDC or 0.5 A at 30 VAC resistive. The receiver runs on 11 to 14 VDC regulated power, uses 902 to 928 MHz frequency-hopping spread spectrum in North America, and adds case tamper, jam detection and internal antennas. It is listed to UL 985, UL 1023, UL 2610 and CAN/ULC S304.

  • Best for: adding up to four EchoStream wireless points to a hardwire control panel, or running a small stand-alone wireless application.
  • System fit: hardwire control panel zone inputs; Inovonics EchoStream transmitters and EN5040 series repeaters.
  • Important to know: power must be unswitched, uninterrupted and regulated 11 to 14 VDC, and the receiver must be within 30 m of the control unit.

Why teams choose it

Built for secure sites

  • Relay outputs

    five Form C relays, four alarm and one fault, rated 1 A at 28 VDC.

  • Configurable outputs

    follower, latching, momentary or toggle mode per output.

  • Supervised wireless

    EchoStream 902 to 928 MHz frequency hopping with jam detection.

  • Listed receiver

    UL 985, UL 1023, UL 2610 and CAN/ULC S304 Security Level 1.

Specifications

Technical specifications

Ask about a spec
Product identifiers
SKUEN4204R
General
Brand Inovonics
Model EN4204R
Device Type Four-zone add-on receiver with relay outputs
Zones 4 (up to four transmitters)
Relays 5 Form C (4 alarm, 1 fault)
Relay Rating 1 A at 28 VDC; 0.5 A at 30 VAC (resistive)
Output Modes Follower, latching, momentary or toggle
Other Outputs Tamper (normally open), jam (normally closed), power loss (open drain)
Reset Input Momentary contact closure to ground
Tamper Case tamper switch
Status Display LED status of all four transmitters
Installation Document 357-00024-03 Rev A
Wireless
Wireless Frequency 902 to 928 MHz (USA); 921 to 928 MHz (NZ)
Protocol EchoStream, frequency-hopping spread spectrum
Antenna Internal
Electrical
Operating Voltage 11 to 14 VDC, unswitched, uninterrupted, regulated
Current Draw About 400 mA maximum with all five relays energized
Wiring 18 to 22 AWG; control unit connections 22 AWG up to 30 m (98.4 ft)
Physical
Dimensions 6.54 x 3.62 x 1.05 in (166.1 x 91.9 x 26.67 mm)
Weight 6.6 oz (187 g)
Environmental
Operating Temperature 32 to 140°F (0 to 60°C)
Humidity Up to 90% relative humidity, non-condensing
Listings and Approvals
Agency Approvals UL 985, UL 1023, UL 2610; CAN/ULC S304:2016 Security Level 1
Regulatory FCC Part 15; ISED license-exempt RSS

Security projects · South Florida

Planning a fire alarm, access or camera project?

Send the site details and our team helps with product selection, a site survey and a project quote.

Start a project request