Macurco · Fire Alarm

Macurco GD-6 Combustible Gas Detector, Controller and Transducer, 4 to 20 mA

Part number / SKU
GD-6
  • Combustible gas detector
  • Methane, propane or hydrogen
  • Standard 4 x 4 electrical box
  • 12 to 24 VAC or 12 to 48 VDC
  • ETL Listed to UL 61010-1

Works with: Macurco DVP-120 control panel, GDM-FCK methane field calibration kit, GDP-FCK propane field calibration kit, GDH-FCK hydrogen field calibration kit Confirmed by the manufacturer


$618.99

In stock

Warranty
Manufacturer warranty

Need project or contract pricing?

Request project pricing
  • Help in English, Spanish and Portuguese

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The Macurco GD-6 is a combustible gas detector, controller and transducer with a field-selectable target gas of methane (natural gas), propane (LP) or hydrogen. It measures 0 to 50% LEL with a pellistor (catalytic bead) sensor and can run a fan, signal an alarm panel, or report to a controller over a 4 to 20 mA loop.

The fan relay (5 A at 240 VAC, SPDT, pilot duty) trips at a selectable 3 to 20% LEL, and the alarm relay (0.5 A at 120 V, 60 VA) at 5 to 25% LEL. Power is 12 to 24 VAC or 12 to 48 VDC at 3 W maximum, with 23 mA standby at 24 VDC. It mounts on a standard 4 x 4 electrical box, covers about 900 sq ft depending on air movement, and is ETL listed to UL 61010-1 and CAN/CSA C22.2 No 61010-1.

The sensor has a life of 5 years or more, and the unit gives an end-of-life signal five years after installation. It works with the Macurco DVP-120 control panel and with other 12 VAC or 24 VDC fire, security or building automation panels.

  • Best for: spaces that need combustible gas detection with automatic fan control.
  • System fit: Macurco DVP-120 control panel; 12 VAC or 24 VDC fire and security panels; building automation 4 to 20 mA inputs.
  • Important to know: mount high for methane or hydrogen and low for propane, about one foot from the ceiling or floor as Macurco directs.

Why teams choose it

Built for fire alarm systems

  • Three selectable gases

    methane, propane or hydrogen.

  • Built-in control

    fan relay and alarm relay with adjustable set points.

  • 4 to 20 mA output

    reports 0 to 50% LEL to a controller.

  • End-of-life signal

    alerts five years after installation.

Specifications

Technical specifications

Ask about a spec
Product identifiers
SKUGD-6
General
Brand Macurco
Model GD-6
Device Type Combustible gas detector
Device Type Detail Controller and transducer
Detection Type Methane, propane or hydrogen
Detection Type Detail Selectable
Sensor Pellistor (catalytic bead), non-replaceable, 5+ year life
Range 0 to 50% LEL
Coverage About 900 sq ft (84 sq m), depending on air movement
Analog Output 4 to 20 mA (0 to 50% LEL); 24 mA on fault
Fan Relay 5 A, 240 VAC, SPDT, pilot duty; 3 to 20% LEL (default 10%); latching or non-latching
Alarm Relay 0.5 A, 120 V, 60 VA; NO or NC; 5 to 25% LEL (default 20%)
Buzzer 85 dBA at 10 cm (off by default)
Display 3-digit LED (off by default)
Mount Type Standard 4 x 4 electrical box
Electrical
Operating Voltage 12 to 24 VAC or 12 to 48 VDC
Power Consumption 3 W max
Current Draw 23 mA standby; 50 mA fan relay on; 75 mA both relays on (24 VDC)
Physical
Dimensions 4.5 x 4 x 2.125 in
Weight 1 lb (0.45 kg)
Color Dark gray
Environmental
Operating Temperature 0°F to 125°F (-18°C to 52°C)
Humidity 10 to 90% RH, non-condensing
Listings and Approvals
Agency Approvals ETL Listed to UL 61010-1
Approval Details ETL Listed to UL 61010-1 and CAN/CSA C22.2 No 61010-1

Security projects · South Florida

Planning a fire alarm, access or camera project?

Send the site details and our team helps with product selection, a site survey and a project quote.

Start a project request