Simplex · Fire Alarm

Xtralis OSI-90 OSID Imager, 90° Lens with 80° Horizontal Coverage, 24 VDC

Part number / SKU
OSI-90
  • Open-area smoke imaging detector
  • Particle detection
  • 20 to 30 VDC, 24 VDC nominal

Works with: OSE-SP-01/W standard-power emitter, OSE-HPW high-power emitter, OSE-HP-01 high-power emitter Confirmed by the manufacturer


$852.59

Special order· Lead time confirmed by our team after you order.

Warranty
Manufacturer warranty

Need project or contract pricing?

Request project pricing
  • Help in English, Spanish and Portuguese

Not sure it fits your system? Check compatibility

Overview

What it is and who it is for

The OSI-90 is the wide-angle imager in the Xtralis OSID open-area smoke imaging detection system. It has a 90° lens with a usable field of view of 80° horizontal and 48° vertical, works with up to seven emitters, and uses dual-wavelength (UV and IR) particle detection with a CMOS imager array.

Range is 6 to 34 m (20 to 112 ft) with standard-power emitters, 12 to 68 m with OSE-HPW high-power emitters and 12 to 50 m with OSE-HP-01 emitters. The imager runs on 20 to 30 VDC (24 VDC nominal), drawing 8 mA typical with one emitter and 10 mA with seven, and has fire alarm and trouble relays with NO-C-NC contacts rated 2 A at 30 VDC. Alarm thresholds are configurable at 20%, 35% or 50%, latching or non-latching by DIP switch.

The electronics are rated IP 44 and the optics enclosure IP 66. The imager measures 208 x 136 x 96 mm (8.2 x 5.4 x 3.8 in), weighs 610 g and adjusts ±60° horizontally and ±15° vertically.

  • Best for: open-area smoke detection where one imager needs a wide 80° horizontal view across up to seven emitters.
  • System fit: Xtralis OSID emitters (standard power, OSE-HPW or OSE-HP-01), with relay outputs to a fire alarm control panel.
  • Important to know: emitters are separate; system design, alignment and commissioning must be done by a qualified fire alarm technician per local code.

Why teams choose it

Built for fire alarm systems

  • Wide coverage

    80° horizontal and 48° vertical usable field of view.

  • Multiple emitters

    one imager works with up to seven emitters.

  • Dual-wavelength detection

    UV and IR particle detection with a CMOS imager.

  • Simple panel interface

    fire and trouble relays rated 2 A at 30 VDC.

Specifications

Technical specifications

Ask about a spec
Product identifiers
SKUOSI-90
General
Brand Xtralis
Series OSID
Model OSI-90
Device Type Open-area smoke imaging detector
Device Type Detail Imager
Detection Type Particle detection
Detection Type Detail Dual-wavelength; UV and IR; CMOS imager array
Lens 90°
Coverage 80° horizontal, 48° vertical usable field of view
Maximum Emitters 7
Range, Standard-Power Emitter 6 to 34 m (20 to 112 ft), OSE-SP-01/W
Range, OSE-HPW Emitter 12 to 68 m
Range, OSE-HP-01 Emitter 12 to 50 m
Alarm Thresholds 20% (0.97 dB), 35% (1.87 dB), 50% (3.01 dB)
Latching Latching or non-latching, DIP switch
Status LEDs Red fire alarm; yellow/green trouble or normal
Electrical
Operating Voltage 20 to 30 VDC, 24 VDC nominal
Current, One Emitter 8 mA typical at 24 VDC
Current, Seven Emitters 10 mA typical at 24 VDC
Heater Input 24 VDC, 16 mA (400 mW)
Relays Fire alarm and trouble, NO-C-NC, 2 A at 30 VDC
Wire Gauge 0.2 to 4 mm² (26 to 12 AWG)
Physical
Dimensions 208 x 136 x 96 mm (8.2 x 5.4 x 3.8 in)
Weight 610 g
Adjustment ±60° horizontal, ±15° vertical
Maximum Misalignment ±2°
Environmental
IP Rating IP 44 electronics; IP 66 optics enclosure
Operating Temperature -10 to 55 °C (14 to 131 °F)
Humidity 10 to 95% RH, non-condensing

Security projects · South Florida

Planning a fire alarm, access or camera project?

Send the site details and our team helps with product selection, a site survey and a project quote.

Start a project request