Tycon TP-SW3G Switch/Extender 3 Port Gigabit 802.3af/at PoE IN/OUT 60W

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐓𝐈𝐓𝐋𝐄
Tycon TP-SW3G 3-Port Gigabit PoE Switch Extender 802.3af/at 60W

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐎𝐕𝐄𝐑𝐕𝐈𝐄𝐖
Tycon TP-SW3G is a 3-port Gigabit PoE switch and Ethernet extender with one PoE input and two 802.3af/at PoE outputs. Supports up to 30W per output port, 60W total, and extends Ethernet/PoE an additional 100m per unit.

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐓𝐘𝐏𝐄 / 𝐂𝐀𝐓𝐄𝐆𝐎𝐑𝐘
Networking
Routers and Switches

𝐊𝐄𝐘 𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒
• Three-port Gigabit PoE switch and Ethernet extender
• One data/PoE input and two data/PoE output ports
• Supports 10/100/1000Mbps auto-negotiation
• PoE input supports IEEE 802.3af, IEEE 802.3at, and IEEE 802.3at 4-pair 60W High PoE
• Accepts 42–57VDC passive PoE
• Two IEEE 802.3af/at compliant Gigabit PoE output ports
• Maximum PoE output of 30W per port, 60W total
• Extends Ethernet and PoE an additional 100m / 330 ft per unit
• Multiple TP-SW3G units can provide effective distances up to approximately 300m depending on connected loads
• Powered through PoE with no additional power supply required
• Compatible with Category 5 or higher Ethernet cable
• Shielded RJ45 connectors grounded to the enclosure
• Automatic MDI/MDI-X crossover
• Automatic speed and duplex sensing
• Built-in surge protection on Ethernet connections
• Conformal-coated electronics for moisture protection
• Compact desktop or wall-mount design
• Compatible with DIN rail adapters
• CE and FCC certified

𝐓𝐄𝐂𝐇𝐍𝐈𝐂𝐀𝐋 𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒
• Model: TP-SW3G
• Product Type: 3-Port Gigabit PoE Switch / Ethernet Extender
• Ports: 1 Data/PoE Input; 2 Data/PoE Outputs
• Transmission Speed: 10/100/1000Mbps Auto-Negotiation
• Connections: Shielded RJ45, grounded to case
• PoE Input Voltage: 44–57VDC
• PoE Input Pinout: Pins 1,2 (V-); 3,6 (V+) and/or 7,8 (V-); 4,5 (V+)
• PoE Output Voltage: 42–55VDC
• PoE Output Pinout: Pins 1,2 (V-); 3,6 (V+)
• Maximum PoE Output: 30W per port, 60W total
• PoE Compatibility: IEEE 802.3af, IEEE 802.3at, IEEE 802.3at 4-Pair 60W High PoE
• PoE Protection: Over-temperature, over-current, short circuit
• ESD Surge Protection: IEC61000-4-2, ±15kV air / ±8kV contact
• EFT Protection: IEC61000-4-4, 40A, 5/50ns
• Self-Consumption: Less than 1.5W typical
• LED Indicators: Link, activity, PoE detect
• Switch Technology: Store and Forward
• Protocol: CSMA/CD
• Flow Control: IEEE 802.3x full-duplex; back pressure half-duplex
• Address Table: 1K MAC, self-learning
• Operating Temperature: -30°C to +60°C / -22°F to +140°F
• Operating Humidity: 5% to 90% RH, non-condensing
• Storage Temperature: -40°C to +85°C / -40°F to +185°F
• Dimensions: 119 x 85 x 28 mm / 4.7 x 3.3 x 1.1 in.
• Weight: 280 g / 9.9 oz.

𝐈𝐍𝐓𝐄𝐍𝐃𝐄𝐃 𝐔𝐒𝐄 / 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒
• Add an additional PoE and data port without running another Ethernet cable
• Extend Ethernet and PoE an additional 100m per TP-SW3G
• The manufacturer application diagram shows the TP-SW3G extending data and power from a Gigabit PoE switch to two downstream PoE devices