Tycon TP-SW5G-D-BT 5-Port Gigabit 802.3bt PoE Switch 90W

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐓𝐈𝐓𝐋𝐄
Tycon TP-SW5G-D-BT 5-Port Gigabit 802.3bt PoE Switch 90W

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐎𝐕𝐄𝐑𝐕𝐈𝐄𝐖
Tycon TP-SW5G-D-BT is a 5-port Gigabit Layer 2 PoE switch with four 802.3af/at/bt outputs up to 90W per port, an 802.3bt PoE uplink input, wire-terminal power input, surge protection, and DIN rail adapters.

𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐓𝐘𝐏𝐄 / 𝐂𝐀𝐓𝐄𝐆𝐎𝐑𝐘
Networking
Routers and Switches

𝐊𝐄𝐘 𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒
• Five-port Gigabit Layer 2 Ethernet PoE switch
• Ports 1-4 support IEEE 802.3af/at/bt PoE
• Up to 90W PoE output per port on ports 1-4
• Supports 2-pair or 4-pair PoE power
• Port 5 supports IEEE 802.3bt PoE input up to 70W
• Wire-terminal power input supports higher-power local installations
• Dual power input capability supports redundant power sources
• 10/100/1000 Mbps Ethernet with auto-negotiation
• Automatic speed and duplex sensing
• Automatic MDI/MDI-X crossover
• Built-in Ethernet surge protection
• Shielded RJ45 connectors grounded to frame ground
• Conformal-coated electronics for moisture protection
• Low self-power consumption
• Wide operating temperature range
• DIN rail adapters included
• Can function as an Ethernet/PoE repeater

𝐓𝐄𝐂𝐇𝐍𝐈𝐂𝐀𝐋 𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒
• Brand: Tycon
• Model: TP-SW5G-D-BT
• Switch Type: Layer 2 Gigabit PoE Switch
• Total Ports: 5
• Ports 1-4: IEEE 802.3bt, up to 90W per port
• Ports 1-4 Compatibility: IEEE 802.3af/at/bt
• Port 5: Uplink, IEEE 802.3bt-compatible PoE input up to 70W
• Transmission Speed: 10/100/1000 Mbps auto-negotiation
• Connections: Shielded RJ45, grounded to FG connection
• Wire-Terminal Input: 53-57VDC
• Input for IEEE 802.3af Devices: 44-57VDC
• Input for IEEE 802.3at Devices: 50-57VDC
• Wire-Terminal Connector Capacity: 10A, approximately 500W maximum
• Power Input Requirement: Input power must exceed total PoE output power
• PoE Protection: Over-temperature, over-current, and short-circuit protection
• ESD Protection: IEC61000-4-2, ±15kV air / ±8kV contact
• EFT Protection: IEC61000-4-4, 40A (5/50ns)
• Self Consumption: Less than 5W typical
• Switch Technology: Store and Forward
• Protocol: CSMA/CD
• Flow Control: IEEE 802.3x full-duplex; back pressure half-duplex
• Data Transmission Rate: 1,488,000 / 148,800 / 14,880 pps
• Address Table: 2K MAC, self-learning
• Ethernet Distance: Up to 100m (328 ft.)
• Repeater Configuration Distance: Up to 200m total
• Operating Temperature: -30°C to +70°C (-22°F to 158°F)
• Operating Humidity: 5% to 90% RH, non-condensing
• Storage Temperature: -40°C to +85°C (-40°F to 185°F)
• Dimensions: 159 x 118 x 40mm (6.3 x 4.6 x 1.6 in.)
• Weight: 318g (11 oz.)
• Manufacturer Warranty: 3 years

𝐈𝐍𝐓𝐄𝐍𝐃𝐄𝐃 𝐔𝐒𝐄 / 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒
• Power up to four IEEE 802.3af/at devices from an IEEE 802.3bt PoE input
• Power up to four IEEE 802.3bt devices from a wire-terminal power input
• Remote or local power for cameras and wireless radios
• Ethernet/PoE repeater applications